Gecko IN.K200 Rectangle with Rounded Sides Keypad 0607-008002

Gecko IN.K200 Rectangle with Rounded Sides Keypad 0607-008002 Gecko keypads, so much at your fingertips! The in.k200 compact series of entry-level keypads gives complete control to wet fingers! Compact, in.k200 has been designed to be easy to master. 4 keys, LED display and 7 light indicators for Gecko’s X, Y and Class series of control systems.

Well Designed

Designed to be easy to master, in.k200 works perfectly in smaller spas equipped with one or 2 pumps. Function light indicators and built-in timers will make user’s life easier.

Intuitive

No need for thick manuals with complicated instructions. A few intuitive presses on labelled keys will command the pumps, blower and light.

All-in-One

With its three digits, 7 segment display, 4 keys and 7 light indicators, in.k200 keypad is the complete spa user’s solution coming in a discreet and elegant package.

Spa System Settings:

Programming Purge Cycles: To program the purge cycles, you must select the frequency. During a purge cycle, all the pumps and the blower run for one minute.

Programming Filter Cycles: Depending on the configuration of your system, this will perform either purge cycles or filter cycles. To program the filter cycles, you must enter the duration and the frequency parameters.

Water Temperature: The system generates water flow through the heater housing and plumbing to ensure accurate water temperature readings and avoid heater activation in dry conditions. After verifying pump activation and taking a water temperature reading if required, system automatically turns the heater on to reach and maintain water temp. at Set Point. The Heater indicator lights up when the heater is on. It flashes when there is a request for more heat but the heater has not started yet.

Smart Winter Mode: SWM protects your system from the cold by turning the pumps on several times per day to prevent water from freezing in the pipes. The SWM indicator lights up when it is on. After heating the spa water at the desired set point, the heater is turned off, but its associated pump (Pump 1 Low-speed or CP) remains on for a certain amount of time to ensure an adequate cooling of the heating element, which extends its useful life. The heater icon will flash during this operation.

in.k200 works with Gecko’s in.xe and Y series of control systems:

• in.xe
• in.yt
• in.ye
• in.yj

Additional Information

Number Of Buttons	4
Connection	in.link Plug
Shape	Rectangle with Rounded Sides
Display Type	LED
Overlay Included	true
Spa Brands	Dynasty Spas
Cable Length	10′

 

	Gecko in.k200 Techbook
	Gecko in.k200QRC
	Andi’s Top Tip –   Summary Model: in.k200 – 0607-008002 Overlay: 9916-101203 Buttons: Pump 1, Light, Up, Down Compatible with: in.yt, in.ye, in.yj or in.xe spa packs (with appropriate software revision) Cord Length: 10′

Alternate Part Numbers

• 3-00-7247
• 0607-008002 (Gecko)
• 58-337-1575
• IN.K200-2OP
• BDLK2002OP
• 12710
• BDLK2002OP

What is a Hot Tub Topside Control?

A Hot Tub Topside Control, also known as a spa control panel or topside controller, is a user interface located on the outer surface of a hot tub or spa. This control panel allows you to interact with and manage various functions of your hot tub, such as adjusting the temperature, activating jets and pumps, setting filtration cycles, controlling lighting, and more. It serves as the command center that puts the power of customization at your fingertips, enabling you to create the perfect spa experience tailored to your preferences.

Typically equipped with a digital display, buttons, and possibly a touchscreen, a topside control panel provides an intuitive and user-friendly way to operate your hot tub. Some advanced models may even offer wireless connectivity, allowing you to control your hot tub remotely through a smartphone app.

As a proud supplier of top-quality spa parts and accessories at Parts4Tubs.com, I'm excited to guide you through the world of Hot Tub Topside Controls. These ingenious devices offer convenience, comfort, and control, ensuring your hot tub relaxation is precisely how you envision it. Let's explore the ins and outs of Hot Tub Topside Controls and how they elevate your spa experience to the next level.

 

 

How does a Topside Control Work?

A Hot Tub Topside Control, often equipped with a digital display and user-friendly buttons, is the primary interface that allows you to interact with and control various functions of your hot tub. Here's how it works:

1. User Interface: The topside control panel is mounted on the exterior of the hot tub, usually within arm's reach when you're seated inside. It features a digital screen that displays relevant information such as water temperature, pump status, and timer settings.
2. Menu Navigation: The control panel presents a menu system that you navigate using the buttons or touchscreen. This menu system provides access to different functions and settings of your hot tub.
3. Temperature Adjustment: One of the key functions of the topside control is temperature regulation. You can adjust the water temperature to your desired level, ensuring a comfortable and relaxing soak.
4. Pump and Jet Control: Through the control panel, you can activate and control the operation of various pumps and jets in your hot tub. This includes turning jets on or off, adjusting their intensity, and controlling the filtration system.
5. Lighting and Auxiliary Features: Many hot tubs come with additional features such as underwater lighting, waterfalls, and music systems. The topside control allows you to manage these features, creating an ambiance that suits your mood.
6. Timer and Programming: Modern topside controls often have programming capabilities, allowing you to set timers for filtration cycles, heating, and other functions. This automation ensures that your hot tub is ready for use when you want it.
7. Error Messages and Diagnostics: In case of any issues or malfunctions, the topside control panel can display error codes or messages. This helps you identify problems and communicate them to technicians for faster and more accurate repairs.
8. User Profiles: Some advanced topside controls offer the option to save user profiles. This is particularly useful if multiple people use the hot tub, as each person can have their preferred settings readily available.

In essence, the topside control serves as the bridge between you and your hot tub's various systems. It allows you to customize your hot tub experience, control its functions, and maintain optimal performance with ease. As you sit back and relax in your hot tub, the topside control ensures that everything is at your fingertips, providing a seamless and enjoyable spa experience. At Parts4Tubs.com, I'm dedicated to providing you with the finest hot tub parts and accessories, including high-quality topside controls, to enhance your hot tub enjoyment.

Can I upgrade a Topside Control?

Yes, you can upgrade a topside control on your hot tub to enjoy enhanced features and improved functionality. Upgrading your topside control can offer several benefits:

1. Advanced Features: Newer topside controls often come with advanced features that may not be available on older models. These features could include improved user interfaces, touchscreens, customizable settings, and compatibility with smart home systems.
2. Ease of Use: Upgraded topside controls may offer a more intuitive and user-friendly interface, making it easier to navigate through menus, adjust settings, and control various functions of your hot tub.
3. Energy Efficiency: Some upgraded controls offer energy-saving modes or programmable timers, allowing you to optimize the operation of your hot tub's components and reduce energy consumption.
4. Compatibility: If you've added new features or components to your hot tub since its original purchase, an upgraded topside control may be necessary to fully integrate and control these additions.
5. Error Detection and Diagnostics: Modern topside controls often have improved diagnostic capabilities, which can help you identify and address issues more efficiently. This can save you time and money on repairs.
6. Remote Access: Certain upgraded topside controls can be connected to mobile apps or home automation systems, allowing you to control your hot tub remotely. This can be especially convenient for preheating your hot tub before you arrive home.
7. Customization: Upgraded controls may offer more customization options, allowing you to tailor your hot tub experience to your preferences, such as personalized user profiles.

Before upgrading your topside control, consider the compatibility with your hot tub model and the specific features you're looking for. Consult your hot tub manufacturer's guidelines or get in touch to ensure a smooth and successful upgrade. At Parts4Tubs.com, I offer a range of topside controls and hot tub parts to help you enhance your hot tub experience. I’m ready to assist you in finding the right topside control that suits your needs and preferences.

What is a Hot Tub Keypad Overlay?

A hot tub keypad overlay, also known as a spa control panel overlay, is a protective and decorative component used in hot tubs and spas. It typically consists of a thin, clear or colored piece of material, often made of durable plastic or silicone, that is designed to cover and protect the control panel or keypad of the hot tub.

Here's what a hot tub keypad overlay does:

1. Protection: The overlay acts as a protective barrier for the underlying control panel or keypad. It shields the sensitive electronics and buttons from exposure to water, chemicals, UV rays, and physical damage, such as scratches or abrasions. This helps extend the lifespan of the control panel.

2. Enhancement: Many overlays are designed with labels, graphics, and button outlines that enhance the appearance of the control panel. They often include icons or text that provide clear instructions for operating the hot tub, making it user-friendly, especially for those who may not be familiar with the hot tub's functions.

3. Customization: Hot tub keypad overlays can be customized to match the branding or style of the hot tub manufacturer. They may feature the manufacturer's logo, model name, or specific design elements. Some hot tub owners choose to customize overlays to add a personal touch to their spa.

4. Ease of Cleaning: The overlay is easier to clean and maintain than the underlying control panel. Spills, dirt, or chemical residues that come into contact with the overlay can be wiped away without affecting the control panel's functionality.

5. Replacement: Over time, keypad overlays may wear out or become damaged due to exposure to harsh spa conditions. Fortunately, they are relatively easy and cost-effective to replace when needed, allowing you to refresh the appearance of your hot tub's control panel.

When replacing a hot tub keypad overlay, it's essential to choose one that is compatible with your hot tub's make and model to ensure that the button layout and functions match the original control panel. This compatibility ensures that the overlay fits correctly and accurately represents the hot tub's settings.

In summary, a hot tub keypad overlay serves as a protective, decorative, and informative layer for the control panel, enhancing the user experience and prolonging the life of the hot tub's control system.

How do you replace a hot tub keypad overlay?

Replacing a hot tub keypad overlay is generally a straightforward process that can be done with some basic tools and careful attention. Here's a step-by-step guide on how to replace a hot tub keypad overlay:

Tools and Materials Needed:

• New keypad overlay (ensure it's compatible with your hot tub model)
• Screwdriver (usually a Phillips-head)
• Mild cleaner or rubbing alcohol
• Soft cloth or paper towels

Step-by-Step Instructions:

1. Turn Off Power: Start by turning off the power to your hot tub. This is essential for safety reasons.

2. Access the Control Panel: Depending on your hot tub's design, you may need to remove a cover or panel to access the control panel. Use a screwdriver to remove any screws or fasteners holding the cover in place.

3. Remove the Old Overlay: Carefully peel off the old keypad overlay. Begin at one corner and gently lift it away from the control panel. Take your time and be cautious not to damage the control panel or its components.

4. Clean the Control Panel: After removing the old overlay, use a soft cloth or paper towel and a mild cleaner or rubbing alcohol to clean the control panel's surface. This step ensures that the new overlay adheres properly and looks clean.

5. Prepare the New Overlay: Ensure that the new hot tub keypad overlay is clean and free of any dust or debris. If the new overlay has an adhesive backing, remove the protective film to expose the adhesive.

6. Align and Apply the New Overlay: Carefully align the new overlay with the control panel. Make sure it matches the button layout and design of the control panel. Begin by aligning one corner and gradually press the overlay onto the control panel's surface, working your way across. Smooth out the overlay to prevent air bubbles or wrinkles.

7. Secure the Control Panel Cover: If you had to remove a cover or panel to access the control panel, reattach it using the screws or fasteners you removed earlier.

8. Turn On Power: Once the new overlay is securely in place, and the control panel cover is reattached, turn the power back on at the main circuit breaker.

9. Test the Keypad: Test the keypad buttons to ensure they function correctly. Press each button to verify that it corresponds to the correct function on the hot tub.

10. Final Cleaning: After installation and testing, wipe down the new overlay with a clean, dry cloth to remove any fingerprints or residue.

You've now successfully replaced your hot tub's keypad overlay. Make sure to use a compatible overlay, and exercise caution during the replacement process to avoid damaging the control panel.

 

Gecko Alliance is a well-known manufacturer of advanced control systems and equipment for the spa and hot tub industry. Here's an overview of their history and the products they manufacture:

History: Gecko Alliance was founded in 1992 in Canada. Over the years, the company has established itself as a leading innovator in the field of spa and hot tub controls. They've consistently developed cutting-edge technology to enhance the user experience and improve the efficiency of hot tubs and spas.

Products: Gecko Alliance manufactures a wide range of products and systems designed for the spa and hot tub industry. Some of their key product categories include:

1. Control Systems: Gecko offers a variety of control systems that allow hot tub owners to manage and customize their spa experience. These systems can control functions such as temperature, filtration, jet intensity, lighting, and more.

2. Key Pads and Keypads Overlays: These user interfaces provide an intuitive way for users to interact with their hot tubs. Keypads and overlays are often customizable to match the specific features of different hot tub models.

3. Pumps and Motors: Gecko produces high-quality pumps and motors that help circulate water and power various functions within hot tubs and spas. These components are essential for maintaining water quality and creating a relaxing spa experience.

4. Heating Systems: Gecko's heating systems are designed to efficiently warm the water in hot tubs and maintain the desired temperature. They offer a range of heating options to suit different hot tub sizes and requirements.

5. Ozonators: Ozonators are used for water sanitation in hot tubs. Gecko's ozonators help keep the water clean and safe by reducing the need for traditional chemical treatments like chlorine.

6. Chlorinators and Salt Systems: These products assist in maintaining water quality by adding chlorine or salt as needed. They offer alternatives to traditional water treatment methods.

7. In.Touch Connectivity: Gecko's In.Touch system allows hot tub owners to control and monitor their spa remotely through a mobile app. This feature enhances convenience and ease of use.

Gecko Alliance is known for its commitment to innovation and product quality. Their systems are used by many hot tub manufacturers worldwide, and their technology helps improve the overall spa experience while promoting energy efficiency and sustainability.