Control, Genuine BWG EL2001M3, P1 (2) , P2 (2) , Bl, 4kW, 115v/230v | G4223-01

💧 Control, Genuine BWG EL2001M3, P1 (2) , P2 (2) , Bl, 4kW, 115v/230v

Made by Balboa Water Group, manufacturer part number G4223-01.

Balboa EL2001M3 Control System with 4.0kW HeaterThe Elite Series (EL) family of hot tub control systems were designed using Balboa’s patented M7® temperature and water flow sensing technology and a new universal control platform. These features increase the reliability, ease of installation and serviceability of the control.The systems have a plastic enclosure to eliminate water intrusion. Connectors are built on to the circuit board minimizing wires and simplifying service.FEATURES:

• State of the art design
• Supports Balboa ML Panels
• Multi-level diagnostic capabilities
• M7® flow and temperature sensors
• All models feature convertible component outputs that can be wired for 120 or 240 volts

⚡ Balboa EL2001 Mach 3 Spa Control with 4.0kW Heater — G4223-01

A genuine Balboa Water Group EL2001 Mach 3 spa control with a 4.0kW heater, supplied without a topside. It runs two 2-speed pumps and a blower in a plastic enclosure.

✨ Key Features

• ✅ Balboa M7 temperature and water-flow sensing
• ✅ Plastic enclosure to keep water out
• ✅ Component outputs can be wired for 120V or 240V

⚙️ Technical Specifications

Specification	Value
Manufacturer	Balboa Water Group
System Model	EL2001
Outputs	Pump 1 (2-speed), Pump 2 (2-speed), Blower
Heater	4.0kW, fixed (bottom)
Supply Voltage	230V, 4-wire
Circulation Pump	Ready, 115V/230V
Topside Included	None
Appliance Setup	Runs 4 appliances, but may be set for 3 when supplied; see the diagram on the box cover to configure
Compatible Topside Panels	Panel type Models ML panels ML400, ML700, ML900 Not for: TP, spaTouch or VL panels (these are for Balboa BP and VS packs)

✅ Check Before You Order

• 📍 Check the model on your existing spa pack label (inside the equipment bay) and match it to this listing, not the brand name on the tub.
• 📍 Check your topside against the Compatible Topside Panels list above. If you are keeping your existing panel, it needs to be on that list.
• 📍 Turn off the power at the breaker before any work. If you are not confident with spa wiring, use a qualified electrician.
• 📍 Not sure? Send us photos of your pack label, board and topside, and we will confirm the right part.

🔧 Parts and fittings for this

Commonly replaced parts

Parts commonly replaced on this item that we stock.