Upgrade Kit, Jandy Pro Series iAquaLink 3.0, RS Systems | IQ30-RS

Jandy iAquaLink 3.0 Web Connection Upgrade Kit – iQ30-RS

Jandy iAquaLink allows you to control your pool anytime, anywhere. Using our free app for your smartphone or web-connected device, you can control all the elements of your pool or pool/spa system, even when you’re on the go. iAquaLink can be used on more mobile device platforms than any other pool control system. Free apps for Apple® and Android™ smartphones and tablets. Mobile web-app works on virtually any other smart device. Jandy iAquaLink is Easy & Convenient.

iQ30-RS Includes:

• AquaLink RS8 PCB Board – Latest Version
• iAquaLink IQ30-A WiFi Antenna

Use iQ30-RS to upgrade these systems:

• AquaLink RS – Rev QQQ & older
• AquaLink PDA – Rev 5.0 & older

As a guide, if you system is earlier than 2012, then you will need to update it using this upgrade.

These are the earlier systems that can be upgraded using this kit.

• 1994-Rev. A = Alpha testing.
• 1995-Rev. B = Beta testing.
• 1996-Rev. C = First production AquaLink RS.
• 1996-Rev. D = Allowed Cleaner JVA socket to be assigned to an auxiliary by turning on dip switch 7.
• 1996-Rev. E = Programmed ON times not recognized after freeze protection activates.
• 1996-Rev. F = RS 2/6 Sharing a heater support, light dimming on RS 4.
• 1997 – Rev. G = First support for SpaLink RS, Cleaner JVA can be assigned without turning on dip 7.
• 1997 – Rev. GG = Cancel button locks-up system.
• 1997 – Rev. GGG = Correction to GG.
• 1998 – Rev. H = First support f or LX / RS 485 connection, memory expansion to 128K of ROM, SpaLink reads pool temperature and OFF when the system is not on.
• 1998 – Rev. HH = Corrects time calibration problem with Rev. H.
• 1998 – Rev. HH 232 = Support for RS 232 Serial Adapter.
• 2000 – Rev. I = First support for OneTouch, includes serial adapter support. Note Rev I will only operate in a Rev. I PCB.
• 2000 – Rev. II = Corrects problem with auxiliaries assigned to f reeze on OneTouch.
• 2002 – Rev. J = Change to 52 PIN PPD and new socket on AquaLink RS PCB.
• 2002 – Rev. JJ = Corrects problem with auxiliaries assigned to freeze on OneTouch.
• 2003 – Rev. K = Support for FlowLink, items manually turned on will reactivate after going to Auto/Service/Time Out.
• 2004 – Rev. L = Color Light Control, PC Docking, Laminar Light Pulse Control (LPC4), Chiller/Heat Pump operation, Run Time (circuits can be set to run manually f or 1 to 10 minutes or for 10 minutes to 2 hours in 10 minute increments). Will communicate directly with AquaPure Chlorine Generator only.
• 2006 – Rev. M = Support for AquaPalm wireless remote, Change chlorine production from AquaPure. AquaPure (revision must be 11230A05 or newer). Assign OneTouch buttons to SpaLink RS buttons.
• 2006 – Rev. MM = Corrects problem when entering into lights labels.
• 2006 – Rev. MMM = Corrects problem associated with daylight savings which caused the AquaPalm to jump lines. Light dimming can be adjusted from AquaPalm.

CPU REVISION CHANGES

• 2007 – Rev. N = Complete change to PCB. The operating chip is no longer a PPD, it is now a CPU (Central Processing Unit) board. The AquaLink RS can be connected via the RS 485 line to a Jandy AE Heat Pump &/or a Jandy LXi Gas Heater.
• 2008 – Rev O = Communication with Variable Speed pumps.
• 2009 – Rev P = Communication with ChemLink, LM3, AutoClear Plus & DuoClear.
• 2010 – Rev Q = first support for Touch Screen panel.

If you have a version that is Rev R or newer (they are alphabetical and increasing) then you can use the Antenna upgrade

Use this link here to upgrade the products below

AquaLink RS – requires revision R or newer (System manufactured in 2012 or later)
AquaLink PDA – requires revision 6.0 or newer (your PDA remote is still required for programming and scheduling)
AquaLink Z4 – all revisions will work

 

 

Smart Device. Smart Pool. Smart You.

Intelligent pool control from your smart phone, tablet, or web-connected device.

iAquaLink allows you to control your pool anytime, anywhere. Using our free app for your smartphone or web-connected device, you can control all the elements of your pool or pool/spa system, even when you’re on the go. iAquaLink can be used on more mobile device platforms than any other pool control system.

Free apps for Apple® and Android™ smartphones and tablets. Mobile web-app works on virtually any other smart device. iAquaLink is Easy & Convenient On the golf course or on the go, control your pool anytime, anywhere with iAquaLink. Most intuitive and user-friendly mobile pool controller ever.

iAquaLink can be used alone, or combined with the complete line of wall-mounted or wireless AquaLink® interfaces. User accounts can be created in minutes, used immediately, and the service is free. Control multiple pools from a single app. Have the pool or spa ready to use as soon as you get home. Forgot to turn the temperature down while on vacation? Not a problem with iAquaLink.

Complete Control Global, 24/7 control of any device connected to the AquaLink System. Pool, spa, and solar valves Pool temperature Spa temperature Waterfalls Spillovers Laminar jets Light dimmers Pool cleaner Color and white lights Landscape lights Filter pump Booster pump And much more

 

Quick Start Guide Download

Product Brochure Download