Eaton Thermostat 275-3123-01

💧 Eaton Thermostat 275-3123-01

Made by Eaton, manufacturer part number 275-3123-01.

Thermostats Single pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad thermostat with a new oneCapillary Length: 12″Bulb Thickness: 5/16″

📏 Specifications

Eaton Thermostat 275-3123-01 Keeping you comfortable, protected and connected Mechanical hi-limits & thermostats from Eaton’s Crouse-Hinds Division are ran at 50/60hz and are used for heavy duty line voltage to control fan coils, motor starters, valves, contactors and circulator motors in heating and/or cooling systems.

Additional Information

Type	Standard
Bulb Diameter	5/16"
Cable Length	12"

Alternate Part Numbers

• 2-05-0149
• 70-08312 (Therm)
• 275-2900-00
• 275-2830-01 (Invensys)
• 55-1004
• 47-335-1061

🔧 Exploded diagram and parts

This part belongs to the Waterpik Laars Spaworks Electric in-line heater assembly. Everything listed below is something we stock for it, and the numbers match the diagram.

Exploded parts diagram: This part is shown as item #7 on the Waterpik Laars Spaworks Electric in-line heater exploded parts diagram.

🔧 Waterpik Laars Spaworks Electric in-line heater – exploded parts diagram

The numbered parts below make up this assembly. Parts we stock are linked – click any to view.