Balboa BP100G2 Bundle Spa Control 4.0kW Remote Heater G6402 Customized to fit your needs!
Balboa BP100G2 Bundle with detached remote 4.0KW heater and the 4 button TP200T topside control panel. This compact basic control system is ideal to retrofit in smaller hot tubs with 1 or 2 pumps. Can run on 120 volts for single pump applications (configuration required) Smoothly integrates with bwa, ControlMySpa, bba. The BP100/200 works with all of Balboa’s TP and SpaTouch Panels.
Features:
- Remote heater
- BP capable features
- Balboa ControlMySpa wifi compatible (Sold Separately)
- Works with the newest TP/SpaTouch Panels
*The Balboa BP100G2 is factory configured for 240 volt applications, pump(s) and ozonator must be 240 volts.
Can be configured for 120 volt but pumps and ozonator must all be 120 volts.
*Pump 1, Circ Pump and Ozone must be the same voltage
*If installing a 24 hour circulation pump, it must have no less than a 23 GPM flow. Laing, Grundfos or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
Additional Information
System Voltage | 115/230V |
Heater Type | Remote Heater |
Heater Wattage | 4.0kW |
Keypad Included | Included |
Supports | Pump1 + Blower/Pump2 |
Balboa BP501 User Guide | |
Balboa BP Troubleshooting Guide | |
Andi’s Top Tip – This compact basic control system is ideal to retrofit in smaller hot tubs with 1 or 2 pumps |
Alternate Part Numbers
- G-6412