| Material Type | Plastic |
| Volute to Seal Plate Mounting Type | 4 Bolts |
| Volute to Seal Plate Hole Spacing | 5-1/16″ |
| Seal Plate to Motor Mounting Type | Square Flange |
| Seal Plate to Motor Hole Spacing | 5-1/16″ |
| Impeller Space Diameter | 4-3/4″ |
| Manufacturer | Waterco |
| Model | SupaStream |
Exploded parts diagram: This part is shown as item #1 on the Waterco SupaStream Series Self Priming In-Ground Budget Pump exploded parts diagram.
🔧 Waterco SupaStream Series Self Priming In-Ground Budget Pump – exploded parts diagram

The numbered parts below make up this assembly. Parts we stock are linked – click any to view.
| No. | Part |
|---|---|
| 20 | 34-252-W007K20 |
| 19 | Nut, Waterco SupaTuf/HydroStorm/SupaStream, 1/4-20 |
| 18 | Washer, Waterco SupaTuf/HydroStorm/SupaStream, 1/4" |
| 17 | Bolt, Waterco SupaTuf/HydroStorm/SupaStream, 1/4-20 x 1" |
| 16 | Pump Stand, Waterco SupaTuf/SupaStream |
| 15 | 35-252-1118 |
| 13 | Basket, Pump, OEM Waterco Supastream/Supamite |
| 12 | 34-252-W007K12 |
| 11 | Trap Lid, Waterco SupaStream/SupaMite, 5-7/8" |
| 10 | Half Union, 1-1/2", with O-Ring |
| 9 | 34-252-W007K9 |
| 8 | 34-252-W007K8 |
| 7 | Gasket, Waterco, Diffuser, 2-1/16"ID, 2-13/16"OD |
| 6 | Screw, Waterco Various Pumps, Diffuser |
| 5 | 35-252-1021 |
| 4 | 34-252-W007K4 |
| 4A | O-Ring, 1-7/8" ID, 3/16" Cross Section, Generic |
| 3 | Shaft Seal, Waterco/Jandy, 3/4" Shaft, Buna, Generic |
| 2 | 34-252-W007K2 |
| 1 | Seal Plate, Waterco SupaStream ◀ this part |




