🔧 CMP Ninja Bath Pump 27210-080-000 – 0.75 HP Single-Speed Whirlpool Bath Pump

Reliable mid-range jet power engineered for demanding whirlpool bath installations

📋 Product Overview

The CMP (Custom Molded Products) Ninja 27210-080-000 is a 0.75 HP single-speed whirlpool bath pump delivering a strong mid-range jet performance at 7.2 amps on standard 115V household power. Part of the proven Ninja/Nexxus bath pump platform, this model fills the sweet spot between the entry-level 6.3A model and the more powerful 8.0A and 10.0A versions, making it ideal for whirlpool bathtubs with 6 to 8 jets.

Drawing 7.2 amps at 115V, the Ninja 70 plugs directly into a standard household outlet and comes ready to install with a 5-foot NEMA power cord, built-in air switch, locking nut for air button tubing, and rubber mounting pads for vibration dampening. This pump serves as a direct replacement for the Balboa Vico WOW and Power WOW bath pump lines, as well as Waterway Genesis models, with identical 1-1/2″ MBT connections and matching footprint.

The compact, footless design is trusted by major tub manufacturers and fits easily within tight whirlpool bathtub enclosures. UL and CSA dual-listed for North American residential safety compliance.

⭐ Key Features

✅ 0.75 HP Motor (7.2A) – Mid-range single-speed motor provides strong jet pressure for 6-8 jet whirlpool baths

✅ 115V / 60Hz Operation – Plugs into standard household outlet — no special wiring or electrician required

✅ Built-In Air Switch – Integrated pneumatic on/off switch for convenient tub-side control

✅ 5-Foot NEMA Power Cord – Extra-long 3-prong grounded cord provides flexible installation positioning

✅ 1-1/2″ MBT Connections – Male buttress thread suction and discharge ports for industry-standard plumbing

✅ Compact Footless Design – Space-saving form factor fits within the tightest whirlpool bathtub enclosures

✅ Thermal Protected Motor – Built-in thermal overload protection prevents motor damage from overheating

✅ IPX5 Enclosure – Water-resistant motor housing meets European standards for splash protection

✅ Rubber Mounting Pads – Included vibration-dampening pads reduce noise and prevent surface damage

✅ UL and CSA Listed – Dual safety certification for North American residential installations

✅ Self-Draining Volute – Promotes hygienic operation by preventing stagnant water buildup

✅ Locking Nut for Air Tubing – Secure connection point for air button tubing included

🔩 Technical Specifications

Specification	Value
Manufacturer	Custom Molded Products (CMP)
Model	Ninja 70 / Nexxus 70
Part Number	27210-080-000 (Nexxus) / 27210-080-900 (Ninja)
Pump Type	Whirlpool Bath Pump
Motor Power	0.75 HP (3/4 HP)
Speed Settings	Single Speed
Voltage	115V
Frequency	60 Hz
Amperage	7.2A
Suction Style	Bottom
Suction Port	1-1/2″ MBT
Discharge Style	Center
Discharge Port	1-1/2″ MBT
Connection OD	2-7/16″
Volute Fastening	4 Bolts
Motor Foot Type	Footless
Drain Plug	None
Cord Type	NEMA 3-prong grounded
Cord Length	5 feet (60 inches)
Air Switch	Built-in (integrated)
Motor Protection	Thermal overload
Enclosure Rating	IPX5
Certifications	UL, CSA

📐 Dimensions

Measurement	Value
Length	13.64 inches
Width	5.35 inches
Discharge Height	6.75 inches
Overall Height	7.28 inches

⚠️ All CMP Ninja/Nexxus bath pump models share identical external dimensions regardless of amperage, making upgrades or downgrades within the family a direct physical swap.

⚡ Electrical Requirements

Electrical Spec	Requirement
Supply Voltage	115V (110V-120V)
Frequency	60 Hz
Phase	Single
Full Load Amps	7.2A
Cord	5-foot NEMA 3-prong grounded plug
Minimum Circuit	15A dedicated circuit

⚠️ IMPORTANT: All electrical work must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and local building codes. Whirlpool baths require GFCI (Ground Fault Circuit Interrupter) protection. Use a dedicated circuit — do not share with other appliances. This pump plugs into a standard 115V household outlet.

---

🔗 Compatibility Guide

This Pump:

📍 Frame: Footless (4-bolt volute mounting) 📍 Suction: 1-1/2″ MBT — Bottom 📍 Discharge: 1-1/2″ MBT — Center 📍 Cord: 5-foot NEMA plug

Direct Replacement For:

Original Pump	Part Number
Balboa Vico	1012107
Balboa Vico	1012151
Balboa Vico	1012153
Balboa Vico Power WOW	1051057
Waterway Genesis	321HF10-0150
Waterway Genesis	321HF10-1150
Waterway	310-2120
Whirlpool Systems	382664
Jacuzzi	9188-002
Putt Universal	PUUTTCAS1098PR
Ultima 2	(by model)

Additional Cross-Reference Numbers: 27210-080, 27210-080-900, 27210080900, 34-605-1025

Ninja vs. Nexxus: CMP has renamed the Ninja line to Nexxus. The Nexxus version (suffix -000) is EU compliant, while the Ninja version (suffix -900) is the standard North American model. Specifications and dimensions are identical — only the compliance certification differs.

---

⚠️ Important Union Compatibility Notice

Unions are sold separately. This pump’s MBT connections require CMP-specific unions:

✅ Compatible Union: CMP Nexxus/Ninja Union 1-1/2″ Slip — Part 21021-100-000 ✅ Compatible Union: 1-1/2″ FBT Union — Part 0602-15 / 0602-15B

❌ DO NOT USE standard pump union 52271000 — it is NOT compatible with the CMP Ninja/Nexxus pump

---

🛠️ Installation Requirements

Mounting:

Requirement	Specification
Mounting Position	Horizontal
Base	Solid, level surface
Vibration Dampening	Included rubber mounting pads
Ventilation	Ensure adequate airflow around motor
Access	Allow clearance for maintenance and union access

Plumbing:

Connection	Size
Suction	1-1/2″ MBT (bottom)
Discharge	1-1/2″ MBT (center)
Union Type	CMP 21021-100-000 or 0602-15B (sold separately)

Installation Notes:

⚠️ Pump must be installed below water level (flooded suction) for proper operation ⚠️ Never run pump dry — causes seal and motor damage ⚠️ Ensure proper grounding and bonding per NEC requirements ⚠️ GFCI protection is required by code ⚠️ This pump is equipped with an air switch — if the motor does not start upon plugging in, the air switch may be in the OFF position. Press the air button to activate. ⚠️ Air button and air tubing are sold separately (tubing: part 63000)

---

🔄 Maintenance Guide

Routine Maintenance:

Task	Frequency	Notes
Check for leaks	Monthly	Around seal plate and union connections
Inspect unions	Monthly	Tighten if needed
Check air switch function	Monthly	Ensure reliable on/off operation
Inspect motor vents	Quarterly	Keep clear of debris for proper cooling
Check mounting pads	Quarterly	Replace if worn or compressed
Verify amperage	Annually	Should read approximately 7.2A

Warning Signs — Replace Pump If:

• Unusual noise (grinding, screeching, or humming without starting)
• Water leaking from seal area
• Motor trips breaker repeatedly
• Reduced water flow or weak jet pressure
• Motor overheating or burning smell
• Air switch no longer activates motor

---

🎛️ CMP Ninja Family Comparison

The CMP Ninja/Nexxus bath pump is available in multiple amperage/horsepower configurations sharing the same compact platform and identical external dimensions:

Model	Amperage	HP	Status
27210-060-900/000	6.3A	0.5 HP	✅ Current
27210-080-900/000	7.2A	0.75 HP	✅ Current — THIS PUMP
27210-090-900/000	8.0A	1.0 HP	✅ Current
27210-110-900/000	10.0A	1.0 HP	✅ Current
27210-130-900/000	12.0A	1.5 HP	❌ Discontinued

All models share the same physical dimensions (13.64″ × 5.35″ × 7.28″), 1-1/2″ MBT connections, built-in air switch, NEMA cord, and footless design. Upgrading or downgrading within the family is a direct physical swap — only the motor power and amperage differ.

---

🛁 Ideal Applications

Application	Suitability	Notes
🛁 Whirlpool bathtub (6-8 jets)	✅ Yes	Sweet spot for mid-size whirlpool baths
🛁 Replacement for Vico WOW/Power WOW 0.75 HP	✅ Yes	Direct replacement — same connections and footprint
🛁 Replacement for Waterway Genesis 321HF	✅ Yes	Matching amperage and plumbing
♨️ Hot tub jet pump	❌ No	Designed for bath applications, not hot tub spa use
♨️ Spa circulation pump	❌ No	Not a circulation pump — this is a jet pump

---

🔩 Optional Accessories

Accessory	Part Number	Description
Pump Union 1-1/2″ Slip	21021-100-000	CMP Ninja/Nexxus specific union
Pump Union 1-1/2″ FBT	0602-15B	Alternative compatible union
Union O-Ring	O-49	Generic 1-1/2″ o-ring for pump union
Plastic Pump Stand	27265-204-000	CMP Ninja/Nexxus mounting stand
Fiberglass Pump Stand	42009-100-000	Heavy-duty fiberglass mounting stand
Pump Pads	27210-000-100	Replacement rubber mounting pads
Air Tubing	63000	1/8″ ID x 1/4″ OD, 10-foot roll
Pump Tee	21014-000-000	1″ x 1″ x 1-1/2″ spigot tee fitting

---

❓ Frequently Asked Questions

Q: What horsepower is this pump? A: The CMP Ninja 27210-080-000 is rated at approximately 0.75 HP (3/4 horsepower), drawing 7.2 amps at 115V. Some sources list it as 0.7 HP based on the “Ninja 70” model designation.

Q: Will this replace my Balboa Vico Power WOW pump? A: Yes. The CMP Ninja 27210-080-000 is a verified replacement for the Vico Power WOW 1051057 and Vico 1012107/1012151/1012153. It has the same 1-1/2″ MBT connections, bottom suction, and center discharge configuration.

Q: What voltage does this pump require? A: 115V / 60Hz — it plugs into a standard household outlet using the included 5-foot NEMA cord. No special wiring is needed.

Q: Does this pump come with an air switch? A: Yes, the air switch is built into the pump. You will need to purchase the air button and air tubing (part 63000) separately. If the motor does not start when plugged in, press the air button — the switch may be in the OFF position.

Q: Are unions included? A: No, unions are sold separately. Use CMP part 21021-100-000 (1-1/2″ slip) or 0602-15B. Important: do NOT use standard pump union 52271000 — it is not compatible with the CMP Ninja/Nexxus pump.

Q: What is the difference between 27210-080-000 and 27210-080-900? A: The -000 suffix (Nexxus) is EU compliant, while the -900 suffix (Ninja) is the standard North American version. Specifications, dimensions, and performance are identical. Both work in US installations.

Q: Can I upgrade from the 6.3A model to this 7.2A model? A: Yes. All CMP Ninja/Nexxus models share identical external dimensions and mounting points. Upgrading from the 6.3A to the 7.2A model is a direct physical swap — just make sure your circuit can handle the slightly higher amperage (7.2A vs 6.3A, both work on a standard 15A circuit).

Q: What size are the ports? A: Both suction and discharge ports are 1-1/2″ male buttress thread (MBT) with a 2-7/16″ outer diameter.

Q: Does this replace the Waterway Genesis 321HF10? A: Yes. The CMP Ninja 27210-080-000 is a verified replacement for the Waterway Genesis 321HF10-0150 and 321HF10-1150 with matching connections and amperage.

Q: Do I need a GFCI breaker? A: Yes, GFCI protection is required by the National Electrical Code (NEC) for all whirlpool bath installations.

Q: Can this pump be used in a hot tub? A: No, this is a whirlpool bath pump designed for bathtub installations. It is not suitable for outdoor hot tub or spa applications.

🏆 Why Choose the CMP Ninja 27210-080-000

✅ Mid-Range Sweet Spot – 7.2A power delivers the ideal balance between jet pressure and energy efficiency for 6-8 jet bathtubs

✅ Proven Platform – Trusted by major tub manufacturers including Lasco for years of reliable service

✅ Broad Compatibility – Direct replacement for Vico WOW/Power WOW, Waterway Genesis, and many other popular bath pumps

✅ Compact Design – Footless, space-saving form factor with identical dimensions across all Ninja models

✅ Complete Package – Comes with 5-foot NEMA cord, built-in air switch, air tubing locking nut, and rubber mounting pads

✅ Dual Safety Certified – Both UL and CSA listed for North American residential installations

✅ Easy Family Swapping – All Ninja models share the same dimensions — upgrade or downgrade without plumbing changes

✅ IPX5 Water Resistance – Motor enclosure rated for splash protection in wet environments

🤝 Why Buy from Parts4Tubs

✅ Fast shipping across the United States

✅ Expert advice from spa and hot tub specialists

✅ Competitive pricing

✅ Full warranty support

✅ Hassle-free returns

✅ Compatible unions and accessories available

✅ Dedicated customer service team

Need Help? Contact our team for compatibility advice — we can help you match the right CMP Ninja model to your whirlpool bathtub.

💫 Summary

The CMP Ninja 27210-080-000 is a reliable 0.75 HP single-speed whirlpool bath pump operating at 115V/7.2A. Featuring a built-in air switch, 5-foot NEMA cord, 1-1/2″ MBT connections, and compact footless design, it serves as a direct replacement for Balboa Vico WOW/Power WOW, Waterway Genesis, and many other bath pumps. All Ninja models share identical dimensions for easy family swapping. UL and CSA dual-listed. Order today from Parts4Tubs for fast US shipping.

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.

2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)

3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.

4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.

5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.

6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.

7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.

8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.

9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.

10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.

11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.

12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.

13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.

14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.

15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.

2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.

3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.

4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.

5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.