Eaton Thermostat 275-3263-00

💧 Eaton Thermostat 275-3263-00

Made by Eaton, manufacturer part number 275-3263-00. It is listed for the equipment shown below, so check the model on your own unit against that list. If your old part carries one of the cross-reference numbers further down, this is listed as its alternative.

Thermostats Single pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad thermostat with a new oneCapillary Length: 18″Bulb Thickness: 5/16″

📏 Specifications

✅ Listed for

• Pentair Minimax 100 Heater

🔄 Cross-reference part numbers

These part numbers are listed as alternatives for this part.

Eaton Thermostat 275-3263-00 Keeping you comfortable, protected and connected Mechanical hi-limits & thermostats from Eaton’s Crouse-Hinds Division are ran at 50/60hz and are used for heavy duty line voltage to control fan coils, motor starters, valves, contactors and circulator motors in heating and/or cooling systems.

Additional Information

Alternate Part Numbers

• 2-05-0130
• 34-0030 (HydroQuip)
• 55-1020
• 47-335-1069