Control, BWG EL2001M3, 5.5kW, P1 , P2 2-Spd, Bl, 115v/230v | 53882-05

💧 Control, BWG EL2001M3, 5.5kW, P1 , P2 2-Spd, Bl, 115v/230v

Made by Balboa Water Group, manufacturer part number 53882-05. If your old part carries one of the cross-reference numbers further down, this is listed as its alternative.

The Elite Series control systems were designed using Balboa’s patented M7™ technology and a new universal control platform. These features increase the reliability, ease of installation and serviceability of the control. Innovative features include having output connectors on the board, which eliminates a maze of wires in the enclosure and ultimately reduces assembly time and margin for error. Spaside, cords, light bulb, drywell, and light reflector sold separately.Balboa Water Group EL2001M3 Operates:

• 2-speed Pump 1
• 2-speed Pump 2
• 1-speed Blower
• Ozonator
• Circ Pump (30GPM minimum)
• 5.5kW heater
• 12v spa light circuit
• Patented M7™ technology (sensors included)
• Plumb on pressure or vacuum side
• Component cords sold separately
• Control panel sold separately
• US & Canadian safety approvals: Control Box Dimensions

🔄 Cross-reference part numbers

These part numbers are listed as alternatives for this part.

⚡ Balboa EL2001 Mach 3 Spa Control with 5.5kW Heater — 53882-05

A genuine Balboa Water Group EL2001 Mach 3 spa control with a 5.5kW heater, supplied without a topside. It runs pump 1, a 2-speed pump 2 and a blower, with outputs connected directly on the board.

✨ Key Features

• ✅ Balboa M7 temperature and water-flow sensing
• ✅ Output connectors on the board instead of loose wiring
• ✅ Topside, cords, light bulb and light reflector sold separately

⚙️ Technical Specifications

Specification	Value
Manufacturer	Balboa Water Group
System Model	EL2001
Outputs	Pump 1 (2-speed), Pump 2 (2-speed), Blower (1-speed), Ozone, Circulation pump, 12V light
Heater	5.5kW, fixed (bottom)
Supply Voltage	230V, 4-wire
Circulation Pump	Yes, 30 GPM minimum
Topside Included	None
Cords	Sold separately
Control Box (H × W × D)	10-9/16″ × 12-1/4″ × 4-1/2″
Compatible Topside Panels	Panel type Models ML panels ML400, ML700, ML900 Not for: TP, spaTouch or VL panels (these are for Balboa BP and VS packs)

✅ Check Before You Order

• 📍 Check the model on your existing spa pack label (inside the equipment bay) and match it to this listing, not the brand name on the tub.
• 📍 Check your topside against the Compatible Topside Panels list above. If you are keeping your existing panel, it needs to be on that list.
• 📍 Turn off the power at the breaker before any work. If you are not confident with spa wiring, use a qualified electrician.
• 📍 Not sure? Send us photos of your pack label, board and topside, and we will confirm the right part.

🔧 Parts and fittings for this