⚙️ Waterway EX2 Spa Pump 3421020-1U — 2.5 HP Dual-Speed 230V 48-Frame | Made in USA

High-performance American-made jet pump — direct retrofit replacement for Aqua-Flo XP2 and XP2e spa pumps

📋 Product Overview

The Waterway EX2 3421020-1U is a 2.5 HP true continuous rated, dual-speed jet pump designed, engineered, and manufactured in the USA by Waterway Plastics at their 460,000 sq. ft. facility in Oxnard, California. Operating at 230V/60Hz with 11.0 Amps on high speed (3,450 RPM) and 3.3 Amps on low speed (1,725 RPM), this 48-frame side-discharge pump delivers powerful hydrotherapy jet performance on high speed and energy-efficient circulation on low speed. The EX2 occupies the same physical volume envelope as the Gecko Aqua-Flo Flo-Master XP2 and XP2e, making it a direct drop-in retrofit that eliminates plumbing modifications when replacing those popular pump models. Equipped with high-quality Viton mechanical seals for superior chemical resistance — including compatibility with salt water sanitizing systems — and built with premium NSF-approved materials, the EX2 carries UL, cUL (CUL), and California Title 20 certifications. The wet end features 2″ Male Buttress Thread (MBT) connections on both the center suction and side discharge, with a rotatable discharge that repositions in 90-degree increments to match existing plumbing layouts. This pump does not include unions or a power cord.

⭐ Key Features

✅ 2.5 HP True Continuous Rated Motor — Full-rated 2.5 HP continuous duty (3.0 HP SPL brake horsepower) with dual-speed operation at 3,450/1,725 RPM for powerful jets and quiet filtration

✅ Made in USA — Designed, engineered, and manufactured by Waterway Plastics in Oxnard, California using premium NSF-approved materials

✅ 11.0 / 3.3 Amp Draw — High speed at 11.0 Amps for full jet power; low speed at just 3.3 Amps for energy-efficient filtration and circulation

✅ 230V / 60Hz Operation — North American electrical standard for efficient dual-speed performance

✅ 48-Frame Motor — Industry-standard 48-frame thru-bolt motor configuration for wide compatibility across spa brands

✅ Direct Aqua-Flo XP2 / XP2e Replacement — Same physical size as the Gecko Aqua-Flo Flo-Master XP2 and XP2e; no plumbing modifications needed when replacing those pumps

✅ Viton Mechanical Seals — Premium chemical-resistant Viton seals handle salt water systems and aggressive spa chemicals for extended seal life

✅ 2″ MBT Connections — Center suction and side discharge both use 2″ Male Buttress Thread with approximately 3″ outer thread diameter

✅ Rotatable Wet End — Side discharge rotates in 90-degree increments (12, 3, 6, or 9 o’clock positions) to match existing plumbing

✅ UL / cUL Certified — Listed under UL File No. E128519; California Title 20 Compliant for energy efficiency standards

✅ High Efficiency Motor — Custom designed motor for spa applications; California Title 20 energy compliance

✅ 1-Year Manufacturer Warranty — OEM Waterway warranty coverage

🔧 Technical Specifications

Specification	Value
Manufacturer	Waterway Plastics (Oxnard, CA, USA)
Pump Series	EX2
Part Number	3421020-1U
Horsepower (Continuous Rated)	2.5 HP
Horsepower (SPL / Brake HP)	3.0 HP SPL
Speed Settings	Dual Speed (2-Speed)
High Speed RPM	3,450 RPM
Low Speed RPM	1,725 RPM
Voltage	230V
Frequency	60 Hz
High Speed Amperage	11.0 Amps
Low Speed Amperage	3.3 Amps
Frame Type	48 Frame (48Y)
Motor Type	A.O. Smith (per original spec; motor brand may vary)
Discharge Location	Side
Discharge Size	2″ MBT (Male Buttress Thread)
Suction Location	Center
Suction Size	2″ MBT (Male Buttress Thread)
Thread OD (Outer Thread)	Approximately 3″ (outside thread to outside thread)
Seal Type	Viton Mechanical Seal
Wet End Rotation	Adjustable in 90° increments
Cord	Not Included
Unions	Not Included
Country of Origin	USA
Certifications	UL, cUL (UL File No. E128519)
Energy Compliance	California Title 20 Compliant
Warranty	1 Year Manufacturer Warranty

⚠️ Note on HP Ratings: Waterway rates this pump at 2.5 HP true continuous duty. Some listings may show “3.0 HP” or “3.0 SPL” — this refers to the Service Power Level (brake horsepower), which is a different measurement standard.

⚠️ Note on Motor Brand: Waterway’s original specification lists the A.O. Smith motor. However, pump and motor manufacturers reserve the right to change motors without notice. Motors may be sourced from US Motors, A.O. Smith/Century, GE, Emerson, or other brands. Functionality remains the same, though minor amp rating variations may occur depending on the motor brand supplied.

⚡ Electrical Requirements

Electrical Spec	Requirement
Supply Voltage	230V
Frequency	60 Hz
Phase	Single Phase
High Speed Amps	11.0 A
Low Speed Amps	3.3 A
High Speed RPM	3,450 RPM
Low Speed RPM	1,725 RPM
Cord	Not Included — Reuse existing or purchase separately

⚠️ IMPORTANT ELECTRICAL SAFETY:

All electrical work must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and local building codes. Hot tubs require GFCI (Ground Fault Circuit Interrupter) protection. A dedicated circuit is required — do not share with other appliances. Do NOT wire both speeds to run simultaneously on 2-speed models. This pump does not include a power cord — reuse your existing AMP cord or purchase a compatible cord separately. For wiring instructions, refer to the wiring diagram on the motor nameplate.

🔗 Compatibility Guide

Frame & Port Configuration

Specification	Detail
Frame	48 Frame (48Y)
Discharge	2″ MBT — Side (Rotatable in 90° increments)
Suction	2″ MBT — Center
Thread OD	Approximately 3″ (outside thread to outside thread)

Direct Replacement For

The Waterway EX2 is specifically designed as a direct drop-in replacement for:

• Gecko Aqua-Flo Flo-Master XP2 — Same physical size and volume envelope; no plumbing modifications required
• Gecko Aqua-Flo Flo-Master XP2e — Same physical size and volume envelope; no plumbing modifications required
• Similar domestic and foreign pump wet ends — Compatible with pumps sharing the same 48-frame, 2″ MBT port configuration

💡 Retrofit Note: The EX2 can also be used to retrofit or replace many other pumps in a wide variety of hot tubs and spas, provided the frame size (48-frame), port sizes (2″ MBT), voltage (230V), and discharge orientation (side discharge) match your existing installation.

Also Replaces Discontinued Waterway Model

• 3411020-1U — Waterway EX2 2.5 HP 1-Speed (discontinued). The 2-speed 3421020-1U is the recommended replacement; wire only the high speed to operate as a single-speed pump.

📐 Alternate Part Numbers

This pump may be listed under the following part numbers across different retailers and distributors:

Waterway Designations

Part Number	Notes
3421020-1U	Primary OEM Part Number
EX-25-2N22CE	Waterway EX2 model designation (2.5 HP)
EX-30-2N22CE	Waterway EX2 model designation (3.0 SPL)
PF-50-2N22C4	Alternative pump model designation
3421028-1UG285	Related variant designation
3421028-0U85	Related variant designation

Aqua-Flo XP2 / XP2e Cross-Reference Part Numbers

The Waterway EX2 3421020-1U is a direct replacement for these Gecko Aqua-Flo Flo-Master XP2 and XP2e part numbers:

Part Number	Notes
06125000-1040	Aqua-Flo FMXP2 (confirmed by PoolSupplyUnlimited)
06125000-1	Aqua-Flo FMXP2 variant
061250000	Aqua-Flo FMXP2
061205000-1040	Aqua-Flo XP2 variant
06125395-2040	Aqua-Flo XP2
061250000-2040	Aqua-Flo XP2e variant
06125854-1	Aqua-Flo variant
06125474-2	Aqua-Flo variant
06125275-1	Aqua-Flo variant
PF-2NCF	Aqua-Flo model designation
XP255	Aqua-Flo XP2 shorthand
XP2552522	Aqua-Flo XP2 variant

Other Cross-Reference Part Numbers

Part Number	Notes
0982601	Watkins / Hot Springs replacement
15-200-5000	OEM cross-reference
73023	Wavemaster 9200 2.5HP replacement
7-184834-02	Motor/pump assembly number

Motor Part Numbers (may vary by production run)

Motor Number	Manufacturer
BN61	A.O. Smith / Century
7-182477-02	A.O. Smith
7-182912-03	A.O. Smith
T55CXBLF-959	Emerson
T55CXBNC-999	Emerson
C55CXJAS-4344	Century

⚠️ Important: Motor brand and model may vary between production runs. Waterway sources motors from multiple manufacturers (A.O. Smith, Century, Emerson, US Motors, GE). The pump function and performance remain the same regardless of motor brand. Minor amperage variations are possible depending on the specific motor supplied.

🛠️ Installation Requirements

Mounting

Requirement	Specification
Mounting Position	Horizontal — on a level surface
Location	Below water level (flooded suction required)
Surface	Solid, level, vibration-dampening
Ventilation	Adequate clearance around motor for cooling; ensure space for external capacitor(s)
Access	Sufficient clearance for maintenance, wet end rotation, and union connections
Water Protection	Installation area should be clear of direct water contact with adequate floor drainage

Plumbing

Connection	Size
Suction	2″ MBT (Center)
Discharge	2″ MBT (Side — Rotatable)
Thread OD	Approximately 3″
Union Type	Waterway male union threads — use Waterway tailpiece assemblies for best connections

Installation Notes

⚠️ Pump must be installed below water level (flooded suction) to ensure proper priming

⚠️ Never run pump dry — causes seal damage and motor overheating

⚠️ Ensure proper grounding and bonding per NEC requirements

⚠️ GFCI protection is required by code for all hot tub and spa installations

⚠️ HAND TIGHTEN UNIONS ONLY — do NOT use a wrench or any adhesives or solvents

⚠️ Do NOT use pipe sealant on plastic parts — some sealants cause stress cracking of plastic. Use only Teflon or other sealing compounds approved for use with plastic

⚠️ Shut-off valves should be installed on both the inlet and outlet for future maintenance

⚠️ Do NOT wire both speeds to run simultaneously on this 2-speed pump

⚠️ This pump does not include a power cord or unions — reuse existing or purchase separately

💡 Wet End Rotation: The side discharge can be rotated to the 12, 3, 6, or 9 o’clock position by loosening the four long bolts at the back of the motor, rotating the wet end to the desired position, and retightening securely.

💡 Pressure Test Warning: New installations often require plumbing inspections. Pressure tests should NOT exceed 40 PSI. Ensure all air is removed from the system before pressurizing. Extreme care must be taken during pressure testing.

🔧 Maintenance Guide

Routine Maintenance

Task	Frequency	Notes
Check for leaks	Monthly	Inspect around mechanical seal and union connections
Inspect unions	Monthly	Hand tighten only if needed — never use a wrench
Clean strainer/filter	As needed	Remove debris to maintain proper flow
Check amperage draw	Annually	Should read approximately 11.0 A (high) / 3.3 A (low)
Inspect motor vents	Quarterly	Keep clear of debris for proper cooling
Check mounting	Quarterly	Ensure pump is secure and level
Inspect for proper operation	Regularly	Listen for unusual noises; check flow rate

Warning Signs — Replace Pump If:

• Unusual noise (grinding, screeching, or humming without rotation)
• Water leaking from the mechanical seal area
• Motor repeatedly trips the circuit breaker
• Noticeably reduced water flow or weak jets
• Motor overheating or burning smell
• Low speed no longer functions
• Motor runs then stops unexpectedly
• Visible corrosion or damage to the wet end or motor housing

Seal Replacement

Detail	Specification
Seal Type	Viton Mechanical Seal
Chemical Resistance	Compatible with salt water systems and standard spa chemicals
Replacement	Replace at first sign of leakage from the seal area

🎯 Ideal Applications

Application	Suitability	Notes
♨️ Hot tub jet pump	✅ Yes	Primary application — designed for larger spa installations with multiple jets
♨️ Aqua-Flo XP2 / XP2e replacement	✅ Yes	Direct drop-in replacement — same physical size, no plumbing modifications
♨️ Dual-speed jet + filtration	✅ Yes	High speed for jets; low speed for energy-efficient filtration and circulation
♨️ Multi-jet spa systems	✅ Yes	Designed to power more jets per pump than standard spa pumps
♨️ Salt water spa systems	✅ Yes	Viton seals handle salt water and aggressive chemical environments
🛁 Whirlpool bath	⚠️ Check compatibility	May work in whirlpool applications with matching frame, port, and voltage specifications

❓ Frequently Asked Questions

Q: What horsepower is this pump? A: This pump is rated at 2.5 HP true continuous duty. Some listings may show “3.0 HP” or “3.0 SPL” — this refers to the Service Power Level (brake horsepower), a different rating standard. The true continuous output is 2.5 HP as confirmed in Waterway’s official product catalog.

Q: Will this pump replace my Aqua-Flo XP2 or XP2e? A: Yes, the Waterway EX2 is specifically designed as a direct replacement for the Gecko Aqua-Flo Flo-Master XP2 and XP2e. It occupies the same physical volume envelope, so no plumbing modifications are needed. Verify that your existing pump is a 48-frame, 230V, 2″ port model before ordering.

Q: What voltage does this pump require? A: 230V / 60Hz single phase. All electrical installation must be performed by a licensed electrician. Verify your spa’s voltage before ordering — using the wrong voltage will damage the motor.

Q: Does this pump come with a power cord? A: No, this pump does not include a power cord. Reuse your existing AMP cord from your old pump, or purchase a compatible cord separately.

Q: Does this pump include unions? A: No, unions are not included. Reuse your existing unions or purchase Waterway tailpiece assemblies separately for the best connection. Hand tighten only — never use a wrench or adhesives.

Q: Can I use this as a single-speed pump? A: Yes, the 2-speed 3421020-1U can be wired for single-speed operation by connecting only the high-speed wiring. This also makes it the recommended replacement for the discontinued 1-speed 3411020-1U model.

Q: What size are the ports? A: Both the suction (center) and discharge (side) ports are 2″ MBT (Male Buttress Thread). The outer thread dimension measures approximately 3″ from outside thread to outside thread.

Q: Can I rotate the discharge to match my plumbing? A: Yes, the side discharge can be rotated to the 12, 3, 6, or 9 o’clock position. Loosen the four long bolts at the back of the motor, rotate the wet end, and retighten securely.

Q: Is this pump compatible with salt water systems? A: Yes, the EX2 is equipped with Viton mechanical seals that provide superior chemical resistance, including compatibility with salt water sanitizing systems.

Q: Where is this pump made? A: The Waterway EX2 is designed, engineered, and manufactured in the USA by Waterway Plastics at their facility in Oxnard, California.

Q: What certifications does this pump carry? A: UL and cUL listed (UL File No. E128519). California Title 20 Compliant for energy efficiency. Built with NSF-approved materials.

Q: The pump may arrive with or without a capacitor — what does this mean? A: Depending on the motor brand and production run, the pump may ship with one or two capacitors mounted externally on the motor housing, or the capacitor may be mounted differently. Ensure your equipment bay has adequate clearance for external capacitor(s). If the capacitor configuration plays a role in your installation, contact Parts4Tubs for verification.

Q: What warranty is included? A: 1-year manufacturer warranty from Waterway Plastics. Contact Parts4Tubs for full warranty terms and conditions.

Q: How do I know if my pump needs replacing? A: Common signs include unusual noise (grinding, screeching), water leaking from the seal area, reduced water flow or weak jets, the motor tripping the circuit breaker, the motor overheating, or low speed no longer functioning.

Q: Do I need a GFCI breaker? A: Yes, GFCI (Ground Fault Circuit Interrupter) protection is required by the National Electrical Code (NEC) for all hot tub and spa installations.

📥 Downloads & Resources

📄 Waterway EX2 Product Catalog & Specifications (PDF) — Official Waterway EX2 product catalog with complete specifications for all 48-frame and 56-frame models, amperage ratings, and performance curves (UL File No. E128519)

🏆 Why Choose the Waterway EX2 3421020-1U

✅ Made in USA — Designed, engineered, and manufactured by Waterway Plastics in Oxnard, California — not an imported or assembled pump

✅ True 2.5 HP Continuous Rated — Full-rated continuous duty horsepower; not inflated “up-to” or peak ratings

✅ Direct Aqua-Flo XP2 Replacement — Same physical envelope eliminates plumbing modifications — the easiest retrofit in the spa pump market

✅ Viton Seals — Premium chemical-resistant seals outlast standard seals, especially in salt water systems

✅ Energy-Efficient Dual Speed — Low speed at just 3.3 Amps delivers significant energy savings during filtration cycles compared to running a single-speed pump at full power

✅ UL / cUL Certified & California Title 20 Compliant — Meets the highest North American safety and energy efficiency standards

🤝 Why Buy From Parts4Tubs

✅ US-based support for American customers

✅ Fast shipping across the United States

✅ Expert advice from spa and hot tub specialists

✅ Competitive pricing in USD

✅ Full warranty support

✅ Hassle-free returns

✅ Replacement seals, impellers, wet ends, and AMP cords available

✅ Dedicated customer service team

✨ Summary

The Waterway EX2 3421020-1U is a 2.5 HP true continuous rated, dual-speed, 230V/60Hz American-made jet pump drawing 11.0/3.3 Amps at 3,450/1,725 RPM. Built by Waterway Plastics in Oxnard, CA with Viton seals, UL/cUL certifications, and California Title 20 compliance, this 48-frame pump is a direct drop-in replacement for the Gecko Aqua-Flo XP2 and XP2e with no plumbing modifications required. Featuring 2″ MBT center suction and rotatable side discharge, the EX2 delivers powerful jet performance on high speed and energy-efficient filtration on low speed. Cord and unions not included. Available now at Parts4Tubs with 1-year manufacturer warranty.

Showing 1 – 5 of 5 results Showing all 5 results Showing the single result No results found

Sort by Price low to high

Sort by Popularity

Sort by Rating

Sort by Price low to high

Sort by Price high to low

Sort by Newness

Sort by Name A - Z

Sort by Name Z - A

Filters Sort results

Reset Apply

	Magic Plastics Union 0602-15 (1.5″ Pump Union) | 1-1/2″S x 1-1/2″FBT Union, Pump, Magic, 1-1/2"S x 1-1/2"FBT (Industry Standard) w/ O-Ring	$6.36 Max: 575 Min: 1 Step: 1 Add to cart
	Magic Plastics Union 0602-20 (2″ Pump Union) | 2″S x 2″FBT w/ O-Ring Union, Pump, Magic, 2"S x 2"FBT (Industry Standard) w/ O-Ring	$8.00 Max: 491 Min: 1 Step: 1 Add to cart
	Waterway Union 400-6010 | 2-1/2″ Union Nut with 2-1/2″ Slip tailpiece and o-ring (2.5″ union) Union, Pump, Waterway, 2-1/2"FBT x 2-1/2"S	$14.77 Max: 145 Min: 1 Step: 1 Add to cart
	1 Speed Pump / Blower / AMP Cord | 21086 Amp Plug, Pump, 1-Speed, 14/3, 4-Pin, 5' Cord, White	$24.71 Max: 426 Min: 1 Step: 1 Add to cart
	Balboa Amp Plug 21087 (For 2 Speed Pumps) Amp Plug, Pump 1 (2-Speed) 14/4, 72" Long, White	$31.72 Max: 176 Min: 1 Step: 1 Add to cart

Hot Tub Pump Collar & Union Size Chart

Imperial & Metric Specifications

Union Size	Collar Size	Thread OD	Union OD	O-Ring Size
1.5" Female Buttress Thread (FBT)	2.5" / 64mm (Tip to Tip) Measurement	2-1/2" 64mm	2-13/16" 71mm	2-5/16" OD 59mm
2" Female Buttress Thread (FBT)	3.1" / 78mm (Tip to Tip) Measurement	3-1/16" 78mm	3-3/8" 81mm	2-15/16" OD 75mm
2.5" Female Buttress Thread (FBT)	3.6" / 91mm (Tip to Tip) Measurement	3-5/8" 91mm	4-1/4" 108mm	3-7/16" OD 87mm

Important Notes

The union "size" (1.5", 2", 2.5") is nominal and doesn't correspond to any actual measurement.

Collar size is measured from thread tip to thread tip on the pump outlet.

Most hot tub pumps use Female Buttress Thread (FBT) - 98% of applications.

O-ring gaskets may vary between manufacturers - measure your existing gasket for accuracy.

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.

2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)

3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.

4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.

5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.

6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.

7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.

8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.

9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.

10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.

11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.

12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.

13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.

14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.

15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.

2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.

3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.

4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.

5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.