Pump, WW Executive, 3.0hp, 230V, 2-Spd, 56Fr, 2″, 8ft Cord l ME-30226-20
$368.81
35 in stock
Fast dispatch
Order in
--:--:--
for shipping today
The Executive 56 Frame Spa Pump has an executive wet end designed for 56-Frame motors along with two double-shielded ball bearings with moisture-resistant grease for quieter operation and long life. The dual speed motors have insulated windings for increased efficiency and large, highly versatile 6-1/2″ diameter wet end for higher head pressure. A split capacitor (start and run) allows for less energy consumption.
Spa Pump Features:
- Executive wet end designed specifically for 56-frame motors
- 56-frame motor for added strength, cooler operating temperature, and longer motor life
- Large 6-1/2″ diameter wet end for higher head pressure
- 2″ intake for improved flow performance and reduced noise
- Wet end can be rotated for easy installation
- Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
- Two speed motors have four sets of insulated windings for increased efficiency
- Dimensions (H x W x L): 9.08″ x 8.05″ x 14.275″
- Available in 1 to 5Hp and in single or dual speed (SEE THE AVAILABLE STYLES TAB)
- California Title 20 Compliant
| Motor Voltage | 230v |
| Speed | 2 Speed (2-Spd) |
| Motor Amperage/Wattage | 9.0A/3.3A |
| Horsepower | 3.0hp |
| Manufacturer | Waterway |
| Pump Model | Executive |
| Suction Pipe Size | 2″ |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Style | Center |
| Discharge Pipe Size | 2″ |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Style | Side |
| Motor Frame | 56 Frame Thru-Bolt |
| Drain Plug Location | 3,6,9 o`clock |
🔩 Technical specifications
| Specification | Value |
|---|---|
| Our part number | ME-30226-20 |
| Brand | Waterway |
| Model | Executive |
| Horsepower | 3 HP |
| Speed | 2-speed |
| Voltage | 230V |
| Frequency | 60 Hz |
| Current draw | 9.0 A high speed / 3.3 A low speed |
| RPM | 3,450 / 1,725 RPM |
| Flow rate | 210 GPM |
| Dimensions (L x W x H) | 9.08 x 8.05 x 14.28 in (231 x 204 x 363 mm) |
| Cable and connection | 8 ft 14/4 cord with an AMP connector, included |
Find the right pump or motor
Enter what is printed on the label of the one you are replacing. Anything that differs is shown with the difference spelled out, so you can judge it for yourself.
Port size is the plumbing thread, not the pipe — a 2 inch union measures about 3 inches across the male thread. Amps are compared to within half an amp, since published figures round differently between motor brands. Voltage is never treated as a near miss: a 115V motor is not one step from a 230V supply. Anything whose page does not publish a figure you entered is left out rather than offered with a caveat — search it by name to see it anyway.
Related products
Out of stock
$837.68
Out of stock
$23.33
Out of stock
Out of stock
$166.89
$4.63
$16.15
Out of stock
$50.64
Out of stock