Motor, Jacuzzi, JVX160, Variable Speed | 71460

Motor Type	Pool
Motor Amperage	9.4A/7.3A
voltage	115v/230v
Speed	Variable Speed (Var-Spd)
Motor Shaft Type	Threaded
Motor Style	Square Flange
Capacitor On Top	No
Manufacturer	Jacuzzi

Jacuzzi replacement pool pump motor – 115V / 230V, variable speed

⚙️ What this motor is

This is a replacement motor only, not a complete pump. It is a square flange motor, which you can recognise by a square plate on the pump end with a bolt through each corner. It runs on 115V / 230V, variable speed. It bolts to the wet end you already have, so the pump housing, impeller and plumbing stay where they are.

✅ Check these before you order

• Mounting. Square flange, C-face and thru-bolt motors are not interchangeable and there is no adapter between them, so check yours matches before ordering.
• Voltage. This motor is 115V / 230V. Read it off the old motor’s label rather than assuming from the wiring – a spa wired for 240V can still run a 120V pump.

🔧 When you fit it

• Fit a new shaft seal at the same time. A failed shaft seal lets water into the motor and is the most common reason a motor dies. Reusing the old one on a new motor is the quickest way to ruin it.
• Rotation. Pool and spa motors turn counter-clockwise seen from the shaft end, shown on the label as CCW or CCWPE. They cannot be reversed by swapping wires, so check the old label if it says anything different.

🔩 Technical specifications

🔧 Exploded diagram and parts

This part belongs to the Jacuzzi JVX160 Variable Speed Pump assembly. Everything listed below is something we stock for it, and the numbers match the diagram.