Gecko in.yj2 Spa Control 1.4/5.5kW No Heater 3-73-5000 The perfect system for entry-level spas with Gecko’s breakthrough features and signature design.
Gecko’s In.Yj-2 heat recovery (thermal transfer) system made for spas that have no heater and use the motor to heat the spa water either through friction or a heat jacket. This kit is the primary replacement for the older TDI / Tridelta / Tecmark thermal transfer systems, as well as the discontinued Len Gordon HT-1000Y2K and the Spa Builders LX-05 systems.
Features:
- K-200 Keypad Included
- Comes with GFCI & Hi-Limit
- No Heater
*REPLACES: HT-1000 Series, HT-2000-Y2k Series
Additional Information
System Voltage | 115V |
Heater Type | Less Heater |
Heater Wattage | 1.4/5.5kW |
Keypad Included | Included |
Supports | 1 Pump |
Gecko In.YJ2 QSC | |
Andi’s Top Tip – If you are looking for a replacement Gecko Spa Pack and you are finding that the product part number is not an exact match – don’t worry. What is important is the model, for example In.YJ or In.YE etc etc. The additional numbers will more than likely be an upgraded system firmware on the Spa Pack so it is unlikely you would find the exact match if you are replacing an older model. Just make sure you match the model In.YJ, YE etc etc. |
Accessories
Led, Controller, In.Mix 300, 2017, With Cable, J&J | ||
Control: In.Grid Heat Pump Module | ||
Module Internet, Gecko In.Touch-2, N.A. Version, For in.y, in.x Series, w/(2) Modules, 7' Cable, (1) 3' Ethernet Cable , (1) Power Adapter & 3' Cable | ||
Audio, In.Stream2 Power Supply W/Quick Connect | ||
In.Clear Graphite Cell 1.5Psi |
Alternate Part Numbers
- 3-73-5000
- HT-1000
- HT-2000-Y2K
- 936540-001
- 936540-003
- 3-60-0168
- 3-60-0134
- 3-70-0415