Control, BWG VS520SZ, P1 (2) , P2 (2) , Bl, Oz, Lt, 5.5kW, 230v | 56007-01

💧 Control, BWG VS520SZ, P1 (2) , P2 (2) , Bl, Oz, Lt, 5.5kW, 230v

Made by Balboa Water Group, manufacturer part number 56007-01. If your old part carries one of the cross-reference numbers further down, this is listed as its alternative.

Balboa Water Group VS520SZ Control SystemFeatures:

• 115/230v Pump 1 circuit
• 115/230v Pump 2 circuit
• 115/230v Pump 3 or Blower circuit
• 115/230v Ozone circuit
• 115/230v Circ Pump circuit (30GPM minimum)
• 5.5kW heater
• 12v spa light circuit
• Patented M7™ technology
• Plumb on pressure or vacuum side
• Component cords included
• Control panel included : NONE
• US & Canadian safety approvals

The Value Series (VS) family of Hot Tub Control Systems were designed using Balboa’s patented M7™ temperature and flow sensor technology and a new universal control platform. The systems have a plastic enclosure to eliminate water intrusion. Connectors are built onto the circuit board minimizing wires and simplifying service. This model is compatible with the Serial Standard panel only, and must be powered by a dedicated 230v supply.

Control Box Dimensions

🔄 Cross-reference part numbers

These part numbers are listed as alternatives for this part.

⚡ Balboa VS520SZ Spa Control with 5.5kW Heater — 56007-01

A genuine Balboa Water Group VS520SZ spa control with a 5.5kW heater, supplied without a topside. It runs two 2-speed pumps, a third pump or blower, ozone, a circulation pump and a 12V light on 230V.

✨ Key Features

• ✅ Balboa M7 temperature and water-flow sensing
• ✅ Can be plumbed on the pressure or vacuum side
• ✅ US and Canadian safety approvals

⚙️ Technical Specifications

Specification	Value
Manufacturer	Balboa Water Group
System Model	VS520SZ
Outputs	Pump 1 (2-speed), Pump 2 (2-speed), Pump 3 or Blower, Ozone, Circulation pump, 12V light
Heater	5.5kW, fixed (bottom)
Supply Voltage	230V, 4-wire
Circulation Pump	Yes, 30 GPM minimum
Topside Included	None
Cords	Component cords included
Compatible Topside Panels	Panel type Models VL panels VL701S Auxiliary panels VX20 (aux), VX40S (aux) Not for: TP, spaTouch or ML panels (these are for Balboa BP and EL packs)

✅ Check Before You Order

• 📍 Check the model on your existing spa pack label (inside the equipment bay) and match it to this listing, not the brand name on the tub.
• 📍 Check your topside against the Compatible Topside Panels list above. If you are keeping your existing panel, it needs to be on that list.
• 📍 Turn off the power at the breaker before any work. If you are not confident with spa wiring, use a qualified electrician.
• 📍 Not sure? Send us photos of your pack label, board and topside, and we will confirm the right part.

📥 Downloads and Resources

📄 Balboa 500Z-Series operation guide (PDF) — start-up, filter cycles and panel functions for VS and GS 500Z to 521Z systems with VL200 to VL406 panels

🔧 Parts and fittings for this

Commonly replaced parts

Parts commonly replaced on this item that we stock.