Confer Plastics Flexible Spa Panel Kit FSP-BLK (Black Color)

Replacing the spa skirting (also known as the spa cabinet or exterior panels) on your hot tub using a Flexible Spa Panel Kit from Confer Plastics can be a relatively straightforward DIY project. Here’s a step-by-step guide to help you through the process:

Materials and Tools Needed:

• Flexible Spa Panel Kit from Confer Plastics (make sure it matches your hot tub model)
• Screwdriver
• Drill with screwdriver bit
• Saw (if needed to trim panels)
• Measuring tape
• Level
• Clamps
• Safety glasses and gloves

Step-by-Step Instructions:

1. Prepare the Area:
   • Ensure your hot tub is empty and disconnected from the power source.
   • Clear any debris or obstructions around the spa skirting area.
2. Remove the Old Skirting:
   • Start by carefully removing the old spa skirting panels. These are usually attached with screws or clips.
   • Use a screwdriver or drill to remove any screws securing the old panels.
   • Gently pull the old panels away from the hot tub’s frame. Be cautious not to damage any underlying components.
3. Measure and Trim (if needed):
   • Measure the space where the new spa panels will be installed.
   • If the panels from the kit are larger than your hot tub’s dimensions, you may need to trim them to fit. Use a saw to cut the panels to the appropriate size.
4. Attach the New Panels:
   • Begin with one panel at a time.
   • Align the panel with the hot tub’s frame, ensuring it’s level and fits snugly.
   • Use clamps to hold the panel in place temporarily.
   • Drill pilot holes through the panel into the hot tub’s frame.
   • Secure the panel in place with screws, making sure it’s firmly attached. Repeat this process for all panels.
5. Continue Installation:
   • Repeat the panel installation process for all sides of the hot tub.
   • Ensure that each panel fits tightly and aligns with the others for a seamless appearance.
6. Finish the Corners:
   • Use corner pieces from the kit to finish the corners neatly. These are often designed to snap into place.
   • Make sure the corner pieces are secure and provide a clean, finished look.
7. Check and Tighten:
   • Once all panels are installed, double-check that they are level and securely attached.
   • Tighten any screws as needed to ensure a snug fit.
8. Reconnect and Test:
   • Reconnect your hot tub to the power source and fill it with water.
   • Test all functions of the hot tub to ensure there are no issues with the new skirting.
9. Final Touches:
   • Clean the new skirting panels to remove any fingerprints or marks.
   • Consider applying a protective UV-resistant treatment if recommended by the manufacturer to prolong the life of the panels.

By following these steps and carefully installing the Flexible Spa Panel Kit from Confer Plastics, you can refresh the look of your hot tub with new skirting panels. Ensure that you adhere to the manufacturer’s instructions and safety guidelines throughout the installation process.