Balboa BP2000 Spa Control 5.5kW Straight Heater 56377-03 The perfect spa retrofit kit
Unparalleled system reliability and innovative engineering. Utilizing higher resistant materials, the BP2000/2100 operates: 2-speed primary pump, (2) 2-speed secondary pumps, Circulation pump, Blower, Ozone and Lights. The BP2000/2100 control system is designed using Balboa’s patented M8 smart temperature and flow sensor technology. Smoothly integrates with all of Balboa’s accessories such as ControlMySpa™, bba™, and Balboa’s various topside panels, including state-of-the-art touchscreen panels.
Features:
- Supports all TP and SpaTouch topsides
- Circulation pump ready (23 GPM)
- Wi-Fi capable
- Optional Balboa Dolphin Remote
*If installing a 24 hour circulation pump, it must have no less than a 23 GPM flow. Laing, Grundfos or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
Additional Information
System Voltage | 230V |
Heater Type | Straight/Fixed |
Heater Wattage | 5.5kW |
Keypad Included | Not Included |
Supports | Pump1 + Pump2 + Blower |
![BP2000Dimensions_0121 BP2000 Dimensions](https://www.balboawatergroup.com/user_images/Spa_Systems/BP2000Dimensions_0121.png)
BP2000 G1 System Specifications (UL Expanded) | |||||||||
Material No. | Pump 1 | Pump 2 | Pump 3 | Circ Pump | Blower | AV (Stereo) | Ozone | Spa Lights | Heater |
56377-XX* | 240V 2 Speed | 240V 2 Speed | 240V 2 Speed | Optional | Optional | 120V | 120V | 10V | 5.5kW @ 240V 800Inc |
56378-XX* | 240V 2 Speed | 240V 2 Speed | 240V 2 Speed | Optional | Optional | 120V | 120V | 10V | 5.5kW @ 240V 825Inc |
56379-XX* | 240V 2 Speed | 240V 2 Speed | 240V 2 Speed | Optional | Optional | 120V | 120V | 10V | 5.5kW @ 240V Titanium |
56589-XX* | 240V 2 Speed | 240V 2 Speed | 240V 2 Speed | Optional | Optional | 120V | 120V | 10V | 4.0kW @ 240V Titanium |
59415-XX* | 240V 2 Speed | 240V 2 Speed | 240V 2 Speed | Optional | Optional | 120V | 120V | 10V | 4.0kW @ 240V 800Inc |
Environmental | |
Operating Temperature | -20˚C (-4°F) to 60˚C (140°F) |
Storage Temperature | -25°C (-13°F) to 85°C (185°F) |
Humidity | Humidity: up to 85% RH, non condensing |
Enclosure | |
IPx5 | Metal Heater |
Certification | |
UL/CE |
![]() |
Balboa BP2000 Tech Sheet / Product manual |
![]() |
Balboa BP Troubleshooting Guide |
![]() |
Andi’s Top Tip –
|
Compatible Topside Controls
Spaside Control, Balboa SpaTouch, Rectangle, Menu Driven w/Label | ||
Spaside Control, Balboa TP400T, 4-Button, No Overlay | ||
Spaside Control, Balboa, TP400W, BP Series, LCD, 4-Button, Warm-Cool-Light-Jets, 7' Cord w/4 Pin Molex Plug | ||
Spaside Control, Balboa TP500, No Overlay, 6-Button | ||
Spaside Control, Balboa TP600, 6-Button, Oval, LCD, No Overlay, 4 pin Molex, 7' cord, 7.1" x 3.5"" | ||
Spaside Control, Balboa TP800 "Menu", Oblong, 9-Button, LCD, Jets1-Jets2-Light-Aux, 4 pin molex | ||
Spaside Control, Master Spa, No Overlay w/Backlight |
Alternate Part Numbers
- 56377
- 56377-02
BP2000 Conversion to Run the System at 120VAC – for Display Only.
Step 1: Remove the single jumper on J24 from the center two pins.
Step 2: Place two jumpers on J24, one jumper connecting the two left pins and the other connecting the
two right pins.
Step 3: Add a jumper wire between Area 2 and Area 4 (J47 to J75)
Step 4: Disconnect (unplug) the heater connector
Step 5: Disconnect the pumps and ozone
Step 6: Bring Neutral to Pin 2 on the Terminal Block
Step 7: Bring Line (Black) to Pin 3 on the Terminal block
Step 8: Bring ground to the bond lug through the enclosure
NOTE: The system will not operate any equipment, other than lights and audio in this confi guration.
If the steps are not reversed before 240V is applied, the system will trip the breaker and
may blow the transformer fuse (F4) also.
115V 115V