💧 Motor, Pentair, 3.2kW, Var-Spd, VFD, PMSM, Almond
Made by Pentair, manufacturer part number 350105S. It is listed for the equipment shown below, so check the model on your own unit against that list.
✅ Listed for
- Pentair Purex IntelliFlo® VF High Performance Pump
- Pentair IntelliFlo® VS (Before 2019)/VS+SVRS (Before 6/2016)
This variable frequency drive motor is designed to use with Pentair IntelliFlo VF, VS 3050 and VS-SVRS inground pool and spa pumps. Available in almond color. 3.2KW PMSM motor.
Pentair replacement pool pump motor – 4.3 HP, variable speed
⚙️ What this motor is
This is a replacement motor only, not a complete pump. It is a square flange motor, which you can recognise by a square plate on the pump end with a bolt through each corner. It bolts to the wet end you already have, so the pump housing, impeller and plumbing stay where they are.
✅ Check these before you order
- Compare total horsepower, not nameplate horsepower. Multiply the horsepower on your old motor’s label by the service factor next to it, and compare that figure. This motor is rated 4.3 HP.
- Mounting. Square flange, C-face and thru-bolt motors are not interchangeable and there is no adapter between them, so check yours matches before ordering.
- Shaft. This motor has a threaded shaft. A threaded shaft has the impeller screwed straight onto it; a keyed shaft is smooth with a groove down it. The two are not interchangeable.
🔧 When you fit it
- Fit a new shaft seal at the same time. A failed shaft seal lets water into the motor and is the most common reason a motor dies. Reusing the old one on a new motor is the quickest way to ruin it.
- Rotation. Pool and spa motors turn counter-clockwise seen from the shaft end, shown on the label as CCW or CCWPE. They cannot be reversed by swapping wires, so check the old label if it says anything different.
- Keep the horsepower the same unless you are changing the impeller too – the impeller is matched to the motor’s output.
🔩 Technical specifications
| Specification | Value |
|---|---|
| Manufacturer part number | 350105S |
| UPC | 788379787912 |
| Brand | Pentair |
| Application | Pool pump motor |
| Horsepower | 4.3 HP |
| Speed | Variable speed |
| Frequency | 60 Hz |
| Phase | Single phase |
| RPM | Variable (450 – 3,450 RPM) |
| Mounting style | Square flange |
| Shaft | Threaded |
| Capacitor position | Not on top (side or rear mounted) |
Find the right pump or motor
Enter what is printed on the label of the one you are replacing. Anything that differs is shown with the difference spelled out, so you can judge it for yourself.
Port size is the plumbing thread, not the pipe — a 2 inch union measures about 3 inches across the male thread. Amps are compared to within half an amp, since published figures round differently between motor brands. Voltage is never treated as a near miss: a 115V motor is not one step from a 230V supply. Anything whose page does not publish a figure you entered is left out rather than offered with a caveat — search it by name to see it anyway.
🔧 Exploded diagram and parts
This part belongs to the Pentair Purex IntelliFloXF® VS Rpl Parts (Before 8/2015) assembly. Everything listed below is something we stock for it, and the numbers match the diagram.
Riser Plate Conversions
| Part | Our part number | Availability | Price | ||
|---|---|---|---|---|---|
![]() |
Keypad Wall Mount Kit, Pentair IntelliFlo, Almond | 356904Z | 2 in stock | $88.66 | Add to cart |
![]() |
Riser Plate Conversion,Pentair IntelliFloXF,XF to Challenger | 400012 | 3 in stock | $79.19 | Add to cart |
Parts that go with this
| Part | Our part number | Availability | Price | ||
|---|---|---|---|---|---|
![]() |
Tool, Pool Tool, Impeller Wrench, Closed | 127 | 13 in stock | $53.79 | Add to cart |
![]() |
Tool, Seal Setting | SS2136 | 9 in stock | $103.11 | Add to cart |


























