Balboa BP2000 Spa Control System with 5.5kW Straight Heater

Premium Digital Control System with High-Power Heating Capability

Product Overview

As a retailer of hot tub spare parts, I’m presenting the Balboa BP2000 – a high-performance control system featuring a powerful 5.5kW straight heater design. This system delivers robust heating capability with advanced control features for demanding spa applications.

Features:

• Supports all TP and SpaTouch topsides
• Circulation pump ready (23 GPM)
• Wi-Fi capable
• Optional Balboa Dolphin Remote

*If installing a 24 hour circulation pump, it must have no less than a 23 GPM flow. Laing, Grundfos or Waterway Tiny Might pumps do not perform at this rate and cannot be used.

Additional Information

	Balboa BP2000 Tech Sheet / Product manual
	Balboa BP Troubleshooting Guide
	Andi’s Top Tip – Supports all TP and SpaTouch topsides Circulation pump ready (23 GPM) Wi-Fi capable Optional Balboa Dolphin Remote

Compatible Topside Controls

Showing 1 – 7 of 7 results Showing all 7 results Showing the single result No results found

Sort by Price low to high

Sort by Popularity Sort by Rating Sort by Price low to high Sort by Price high to low Sort by Newness Sort by Name A - Z Sort by Name Z - A

Filters Sort results

Reset Apply

	Balboa TP400W Keypad 50259 Spaside Control, Balboa, TP400W, BP Series, LCD, 4-Button, Warm-Cool-Light-Jets, 7' Cord w/4 Pin Molex Plug	$0.00 Max: Min: 1 Step: 1 Add to cart
	Balboa SpaTouch 1 Keypad 50587 Spaside Control, Balboa SpaTouch, Rectangle, Menu Driven w/Label	$0.00 Max: Min: 1 Step: 1 Add to cart
	Balboa TP400T Rectangle with Rounded Sides Keypad 55701 Spaside Control, Balboa TP400T, 4-Button, No Overlay	$138.41 Max: Min: 1 Step: 1 Add to cart
	Balboa TP500 Keypad 57238-01 Spaside Control, Balboa TP500, No Overlay, 6-Button	$158.30 Max: Min: 1 Step: 1 Add to cart
	Balboa TP600 Oval Keypad 55676-09 Spaside Control, Balboa TP600, 6-Button, Oval, LCD, No Overlay, 4 pin Molex, 7' cord, 7.1" x 3.5""	$232.26 Max: 10 Min: 1 Step: 1 Add to cart
	Balboa TP800 Keypad 57241 Spaside Control, Balboa TP800 "Menu", Oblong, 9-Button, LCD, Jets1-Jets2-Light-Aux, 4 pin molex	$274.47 Max: Min: 1 Step: 1 Add to cart
	MasterSpa SpaTouch Keypad X310308 Spaside Control, Master Spa, No Overlay w/Backlight	$346.56 Max: 12 Min: 1 Step: 1 Add to cart

Alternate Part Numbers

• 56377
• 56377-02

BP2000 Conversion to Run the System at 120VAC – for Display Only.

Step 1: Remove the single jumper on J24 from the center two pins.

Step 2: Place two jumpers on J24, one jumper connecting the two left pins and the other connecting the

two right pins.

Step 3: Add a jumper wire between Area 2 and Area 4 (J47 to J75)

Step 4: Disconnect (unplug) the heater connector

Step 5: Disconnect the pumps and ozone

Step 6: Bring Neutral to Pin 2 on the Terminal Block

Step 7: Bring Line (Black) to Pin 3 on the Terminal block

Step 8: Bring ground to the bond lug through the enclosure

NOTE: The system will not operate any equipment, other than lights and audio in this confi guration.

If the steps are not reversed before 240V is applied, the system will trip the breaker and

may blow the transformer fuse (F4) also.

115V 115V