🔄 LX Lingxiao 56WUA500-II Spa Pump — 5.0 HP 2-Speed 230V 56-Frame

Heavy-duty dual-speed power for maximum jet performance in large spa systems

📋 Product Overview

The LX 56WUA500-II is a 5.0 HP, 230V, dual-speed jet pump engineered by Guangdong Lingxiao (Powerful Water Technology Limited) for heavy-duty performance in large North American spa and hot tub systems. This pump delivers powerful high-speed jet operation for hydrotherapy massage and energy-efficient low-speed circulation for filtration and water treatment cycles.

Built on a robust 56-frame thru-bolt motor platform with 2½” MBT (Male Buttress Thread) inlet and outlet connections, the 56WUA500-II is specifically designed for high-capacity spas with extensive jet configurations. The WUA series features pure copper winding motors with Texas Instruments thermal protection and anti-creep bearings for long-lasting, quiet operation. This pump is commonly used as a direct replacement for the Gecko Aqua-Flo XP2e 5.0 HP 56-frame pumps, making it an excellent upgrade or replacement option. Unions are included; pump cord is not included.

---

⭐ Key Features

✅ 5.0 HP Dual-Speed Motor — Delivers robust high-speed jet power (15.0A) and efficient low-speed circulation (5.0A) in a single pump

✅ 230V / 60Hz Operation — Engineered specifically for North American electrical standards with stable, consistent performance

✅ 56-Frame Thru-Bolt Construction — Heavy-duty motor frame provides enhanced durability and longer service life compared to 48-frame models

✅ 2½” MBT Inlet and Outlet — Oversized ports deliver superior water flow with reduced restriction and lower noise levels

✅ Center Suction / Side Discharge — Industry-standard configuration for straightforward installation and plumbing compatibility

✅ Pure Copper Winding Motor — Premium motor windings ensure efficient power transfer and heat management for extended motor life

✅ Mechanical Shaft Seal (Viton / Silicon Carbide) — High-grade seal materials provide reliable, leak-free operation under continuous use

✅ Texas Instruments Thermal Protector — Automatic motor shutdown prevents overheating damage, extending pump lifespan

✅ Anti-Creep Bearings — Precision-engineered bearings reduce vibration and noise for quieter operation

✅ UL, CUL & ETL Certified — Meets North American safety standards for residential and commercial spa installations

✅ 2½” Unions Included — Ready for quick installation with industry-standard union connections

✅ 1-Year Manufacturer Warranty — Backed by Lingxiao’s factory warranty for peace of mind

⚙️ Technical Specifications

Specification	Value
Brand	LX Lingxiao (Guangdong Lingxiao / Powerful Water Technology Ltd.)
Model Number	56WUA500-II
Series	WUA
Pump Type	Jet Pump (Dual-Speed)
Motor Power	5.0 HP (Input / Brake Torque HP)
Low Speed	1.0 HP (Input)
Speed Settings	2-Speed (High / Low)
Voltage	230V
Frequency	60 Hz
Amperage (High Speed)	15.0 A
Amperage (Low Speed)	5.0 A
RPM (High Speed)	3,450
RPM (Low Speed)	1,725
Frame Type	56Y (56-Frame Thru-Bolt)
Discharge Type	Side Discharge
Discharge Size	2½” MBT (Male Buttress Thread)
Suction Type	Center Suction
Suction Size	2½” MBT (Male Buttress Thread)
Dimensions (Pump Body)	17-1/16″ L × 8-11/16″ W × 9-1/2″ H
Dimensions (With Unions)	21″ L × 11″ W × 12″ H
Drain Plug Positions	3, 6, 9 o’clock
Seal Type	Mechanical (Viton / Silicon Carbide)
Motor Winding	Pure Copper
Thermal Protection	Texas Instruments Thermal Protector
Bearings	Anti-Creep
Cord	Not Included (requires separate pump cord)
Unions	2½” Unions Included
Certifications	UL, CUL, ETL
Warranty	1 Year (Manufacturer)

⚠️ Dimensions Note: The 17-1/16″ × 8-11/16″ × 9-1/2″ measurement represents the pump body only. The 21″ × 11″ × 12″ measurement includes the attached unions. Always verify available space in your equipment bay before ordering.

🔌 Electrical Requirements

Electrical Spec	Requirement
Supply Voltage	230V
Frequency	60 Hz
Phase	Single Phase
Full Load Amps (High Speed)	15.0 A
Full Load Amps (Low Speed)	5.0 A
Wiring	4-Wire Connection (for 2-speed operation)
Cord	Not included — requires a 2-speed AMP cord (4-pin, 14/4 AWG)

⚠️ IMPORTANT ELECTRICAL SAFETY NOTICES:

• All electrical work must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and local building codes.
• Hot tubs require GFCI (Ground Fault Circuit Interrupter) protection per NEC requirements.
• A dedicated circuit is required — do not share with other appliances.
• This is a 2-speed pump requiring a 4-wire connection (Common, High, Low, Ground). Do NOT assume the wire positions are the same as your old pump — always follow the wiring diagram included with the pump.
• Verify your existing pump’s voltage before ordering. Using the wrong voltage will damage the motor and void the warranty.

🔗 Compatibility Guide

This Pump:

📍 Frame: 56-Frame Thru-Bolt 📍 Wet End: 2½” MBT connections 📍 Discharge: 2½” Side Discharge 📍 Suction: 2½” Center Suction

Common Replacement For:

This pump is commonly used as a direct replacement for the Gecko Aqua-Flo Flo-Master XP2e 5.0 HP, 56-frame, 2-speed pumps with 2½” inlet and 2½” discharge configurations.

OEM Cross-Reference Part Numbers:

• Artesian Spas Part Number: 21-0117-81
• Replaces OEM: 390595

⚠️ Important Compatibility Notes:

• The 56WUA500-II has 2½” × 2½” ports. If your existing pump has 2″ ports, you will need port adapters or should order the 2″ version instead.
• When replacing a Coast Spa pump or other pump that connects to 2″ plumbing, 2″ to 2½” reducer adapters (such as Waterway 415-6010) may be required.
• The wet end can be rotated on the motor by loosening the thru-bolts and re-clocking to match your plumbing orientation.

🛠️ Installation Requirements

Mounting:

Requirement	Specification
Mounting Position	Horizontal
Base	Solid, level, vibration-dampening surface
Ventilation	Minimum 6 inches clearance around motor for air cooling
Access	Minimum 12 inches clearance for service and maintenance

Plumbing:

Connection	Size
Suction	2½” MBT (Center)
Discharge	2½” MBT (Side)
Union Type	2½” Buttress Thread Unions (included)

Installation Notes:

⚠️ Pump must be installed below water level (flooded suction) to ensure proper priming. ⚠️ Never run the pump dry — dry running causes immediate seal damage and voids the warranty. ⚠️ Ensure proper grounding and bonding per NEC requirements. ⚠️ GFCI protection is required by code for all hot tub and spa installations. ⚠️ The pump does not include a cord. A 2-speed AMP plug cord (4-pin, 14/4 AWG) must be purchased separately. ⚠️ Do not place wires in the same positions as your old pump — follow the wiring diagram included with the new pump, as terminal positions may differ between manufacturers.

Wet End Rotation:

The wet end can be rotated in 90° increments to match your discharge plumbing orientation. Loosen the thru-bolts, rotate the wet end to the desired position, and retighten evenly.

---

🔧 Maintenance Guide

Routine Maintenance:

Task	Frequency	Notes
Check for leaks	Monthly	Inspect around seal plate and union connections
Inspect unions	Monthly	Tighten if needed — hand-tight plus ¼ turn
Check drain plugs	Monthly	Ensure plugs at 3/6/9 o’clock are secure
Inspect motor vents	Quarterly	Keep clear of debris for proper cooling
Check mounting bolts	Quarterly	Retighten if loose from vibration
Check amperage draw	Annually	Should read approximately 15.0A (high) / 5.0A (low)
Inspect pump cord connections	Annually	Check for corrosion or loose terminals

Warning Signs — Replace Pump If:

• Unusual noise such as grinding, screeching, or humming without rotation
• Water leaking from the seal plate area
• Motor trips the circuit breaker repeatedly
• Noticeable reduction in water flow or jet pressure
• Motor housing is excessively hot to the touch
• Visible corrosion on the motor housing or end bells

Seal Replacement:

📍 Seal Type: Mechanical (Viton / Silicon Carbide) ⚠️ Replace the seal at the first sign of leakage from the seal plate area. A small drip will quickly become a major leak if ignored.

---

🎯 Ideal Applications

Application	Suitability	Notes
♨️ Large hot tub jet pump	Yes	Designed for high-capacity spa systems with multiple jet zones
♨️ Dual-speed spa operation	Yes	High speed for massage jets, low speed for filtration/circulation
♨️ Commercial spa installations	Yes	Heavy-duty 56-frame motor handles continuous commercial use
🛁 Whirlpool bath	See note	Verify electrical and plumbing compatibility before use
♨️ XP2e 5HP replacement	Yes	Direct drop-in replacement for Aqua-Flo XP2e 5.0HP 56-frame pumps

---

❓ Frequently Asked Questions

Q: What horsepower is this pump? A: The 56WUA500-II is rated at 5.0 HP input (brake torque horsepower) on high speed, with 1.0 HP input on low speed. It draws 15.0 amps on high speed and 5.0 amps on low speed at 230V.

Q: Will this fit my hot tub? A: This pump has a 56-frame thru-bolt motor with 2½” MBT suction and discharge connections. Check your existing pump’s frame size and port dimensions before ordering. If your current pump has 2″ ports, you will need adapters or a different model.

Q: What voltage does this pump require? A: 230V / 60Hz single phase. All electrical installation must be performed by a licensed electrician per the NEC and local codes.

Q: Does this pump come with a cord? A: No, the pump cord is not included. You will need a 2-speed AMP plug cord (4-pin, 14/4 AWG, typically sold separately). See Parts4Tubs for compatible 2-speed pump cords.

Q: Can this replace my Aqua-Flo XP2e pump? A: Yes, the 56WUA500-II is commonly used as a direct replacement for the Gecko Aqua-Flo Flo-Master XP2e 5.0 HP, 56-frame, 2-speed pumps with 2½” connections. The wet end and mounting dimensions are compatible.

Q: What size are the ports? A: Both suction (intake) and discharge (outlet) are 2½” Male Buttress Thread (MBT). The suction is center-mounted and the discharge is side-mounted.

Q: Are unions included? A: Yes, a set of 2½” unions is included for convenient installation.

Q: What warranty is included? A: The pump includes a 1-year manufacturer warranty. Contact Parts4Tubs for full warranty terms and support.

Q: How do I know if my pump needs replacing? A: Common signs include unusual noise (grinding or screeching), water leaking from the seal plate, reduced water flow, the motor tripping the circuit breaker, or the motor running excessively hot.

Q: Do I need a GFCI breaker? A: Yes, GFCI (Ground Fault Circuit Interrupter) protection is required by the National Electrical Code (NEC) for all hot tub and spa installations.

Q: Can I rotate the wet end to match my plumbing? A: Yes, the wet end can be rotated in 90° increments. Loosen the thru-bolts, rotate to the desired position, and retighten evenly.

Q: What is the difference between 56WUA500-II and 56WUA500-I? A: The 56WUA500-II is a 2-speed pump (high speed + low speed), while the 56WUA500-I is a single-speed pump (high speed only). The 2-speed version requires a 4-wire connection; the single-speed requires a 3-wire connection.

🏆 Why Choose the LX 56WUA500-II

✅ Maximum jet power — 5.0 HP delivers strong, consistent water pressure for large multi-jet spa systems

✅ Dual-speed versatility — High speed for powerful hydrotherapy, low speed for efficient filtration and circulation

✅ Heavy-duty 56-frame motor — Built for continuous commercial and residential use with extended service life

✅ Premium components — Pure copper windings, silicon carbide seal, anti-creep bearings, and TI thermal protection

✅ Direct XP2e replacement — Drop-in compatibility with Aqua-Flo XP2e 5.0 HP 56-frame pumps

✅ UL, CUL & ETL certified — Meets all North American electrical safety standards

✅ Energy-efficient low speed — Only 5.0A draw on low speed reduces operating costs during filtration cycles

✅ 1-year manufacturer warranty — Factory-backed protection for quality assurance

🤝 Why Buy from Parts4Tubs

✅ US-based support for American customers

✅ Fast shipping across the United States

✅ Expert advice from spa and hot tub specialists

✅ Competitive pricing in USD

✅ Full warranty support

✅ Hassle-free returns

✅ Replacement seals, unions, and pump cords available

✅ Dedicated customer service team

🔄 Alternate Part Numbers

Primary Model Variations: 56WUA500-II, 56WUA500II, LX56WUA500-II, LX56WUA500II, 56WUA500A, 56WUA500A-II, 56WUA500AII, WUA500-II

Single-Speed Counterpart: 56WUA500-I (1-Speed version, 230V, 15.0A, same wet end and frame)

OEM / Replacement Cross-References:

• Artesian Spas: 21-0117-81
• Replaces OEM Part: 390595
• Replaces Gecko Aqua-Flo XP2e 5.0 HP, 56-Frame, 2-Speed, 2½” × 2½” pumps

Wet End Part Number: WE-56WUA500 (complete wet end assembly for 2½” × 2½” configuration)

Related Component: IMP-56WUA500 (5.0 HP impeller for 56WUA500 series)

✨ Summary

The LX Lingxiao 56WUA500-II is a powerful 5.0 HP dual-speed jet pump built for large spa systems demanding maximum water flow and jet pressure. Operating at 230V/60Hz with UL, CUL, and ETL certification, this 56-frame pump features premium copper windings, silicon carbide mechanical seals, and anti-creep bearings for quiet, reliable performance. With 2½” MBT connections and direct drop-in compatibility with Aqua-Flo XP2e 5.0 HP pumps, the 56WUA500-II delivers professional-grade hydrotherapy power backed by a 1-year manufacturer warranty. Order with confidence from Parts4Tubs.

 

Showing 1 – 5 of 5 results Showing all 5 results Showing the single result No results found

Sort by Price low to high

Sort by Popularity

Sort by Rating

Sort by Price low to high

Sort by Price high to low

Sort by Newness

Sort by Name A - Z

Sort by Name Z - A

Filters Sort results

Reset Apply

	Magic Plastics Union 0602-15 (1.5″ Pump Union) | 1-1/2″S x 1-1/2″FBT Union, Pump, Magic, 1-1/2"S x 1-1/2"FBT (Industry Standard) w/ O-Ring	$6.36 Max: 509 Min: 1 Step: 1 Add to cart
	Magic Plastics Union 0602-20 (2″ Pump Union) | 2″S x 2″FBT w/ O-Ring Union, Pump, Magic, 2"S x 2"FBT (Industry Standard) w/ O-Ring	$8.00 Max: 659 Min: 1 Step: 1 Add to cart
	Waterway Union 400-6010 | 2-1/2″ Union Nut with 2-1/2″ Slip tailpiece and o-ring (2.5″ union) Union, Pump, Waterway, 2-1/2"FBT x 2-1/2"S	$14.77 Max: 144 Min: 1 Step: 1 Add to cart
	1 Speed Pump / Blower / AMP Cord | 21086 Amp Plug, Pump, 1-Speed, 14/3, 4-Pin, 5' Cord, White	$24.71 Max: 414 Min: 1 Step: 1 Add to cart
	Balboa Amp Plug 21087 (For 2 Speed Pumps) Amp Plug, Pump 1 (2-Speed) 14/4, 72" Long, White	$31.72 Max: 163 Min: 1 Step: 1 Add to cart

Hot Tub Pump Collar & Union Size Chart

Imperial & Metric Specifications

Union Size	Collar Size	Thread OD	Union OD	O-Ring Size
1.5" Female Buttress Thread (FBT)	2.5" / 64mm (Tip to Tip) Measurement	2-1/2" 64mm	2-13/16" 71mm	2-5/16" OD 59mm
2" Female Buttress Thread (FBT)	3.1" / 78mm (Tip to Tip) Measurement	3-1/16" 78mm	3-3/8" 81mm	2-15/16" OD 75mm
2.5" Female Buttress Thread (FBT)	3.6" / 91mm (Tip to Tip) Measurement	3-5/8" 91mm	4-1/4" 108mm	3-7/16" OD 87mm

Important Notes

The union "size" (1.5", 2", 2.5") is nominal and doesn't correspond to any actual measurement.

Collar size is measured from thread tip to thread tip on the pump outlet.

Most hot tub pumps use Female Buttress Thread (FBT) - 98% of applications.

O-ring gaskets may vary between manufacturers - measure your existing gasket for accuracy.

How do I Replace a Hot Tub Pump?

Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance.

Materials You'll Need:

• Replacement pump
• Pipe wrench
• Adjustable wrench
• Screwdriver
• Pipe sealant (thread tape or plumber's putty)
• PVC primer and cement (if you have PVC plumbing)
• Teflon tape (for threaded connections)

Procedure:

1. Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components.

2. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves)

3. Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment.

4. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump.

5. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing.

6. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts.

7. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks.

8. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts.

9. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly.

10. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure.

11. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch.

12. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections.

13. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water.

14. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed.

15. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues.

Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help.

How do I know what size hot tub pump I have?

Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps:

1. Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump.

2. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it.

3. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump.

4. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub.

5. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model.

Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.